Los Banos Municipal Code Art. 4 Requirements for Types of Subdivisions

Subdivision design and improvements shall be required as set forth in this chapter. No building permit shall be issued, and no construction shall be commenced, until the final map is recorded. No improvement shall be commenced until improvement plans are approved.

(§ 3.00, Ord. 341)

(a) Lot area and width. The minimum lot area and width for industrial subdivisions shall be as set forth in the zoning regulations of the City.

(b) Street design. The street design shall be as set forth in Sections 9-2.510 and 9-2.511 of Article 5 of this chapter for industrial areas.

(c) Improvements. All improvements shall be as set forth in Article 6 of this chapter.

(d) Other regulations. All other regulations set forth in this chapter shall be complied with in the development of industrial subdivisions.

(§ 3.01, Ord. 341, as amended by § 6, Ord. 1102, eff. February 4, 2012)

(a) Lot area and width. The minimum lot area and width for commercial subdivisions shall be as set forth in the zoning regulations of the City.

(b) Street design. The street design shall be as set forth in Section 9-2.511 of Article 5 of this chapter for commercial areas.

(c) Improvements. All improvements shall be as set forth in Article 6 of this chapter.

(d) Other regulations. All other regulations set forth in this chapter shall be complied with in the development of commercial subdivisions.

(§ 3.02, Ord. 341, as amended by § 7, Ord. 1102, eff. February 4, 2012)

(a) Lot area and width. The minimum lot area and width shall be as set forth in the zoning regulations of the City.

(b) Improvements. All design standards and improvements shall be as set forth in Articles 5 and 6 of this chapter.

(c) Regulations. All other regulations set forth in this chapter shall be complied within the development of residential subdivisions.

(§ 3.03, Ord. 341, as amended by § 1, Ord. 629, eff. February 5, 1979, § 1, Ord. 773, eff. January 1, 1988, and § 8, Ord. 1102, eff. February 4, 2012)