Title III — Land Use and Development›Part 2 — SPECIAL AREA COMBINING ZONES
Humboldt County Municipal Code § 313-40 “Y” Combining Zone Designations
Humboldt County Municipal Code · 2026-10 edition · updated 2026-10-22 · Humboldt County
Cite as: Humboldt County Municipal Code § 313-40 · Text as of 2026-10-22
40.1 Y: SPECIFIED MINIMUM AND AVERAGE LOT SIZES¶
40.1.1 Special Representation for Minimum Lot Size, where a Minimum Lot Size and…¶
Size are Both Specified. Whenever the principal zone is modified to specify a minimum lot size and a minimum average-lot size that must be maintained in subdividing any lot within the zone, the following designators shall be used as applicable: (Former Section CZ#A313-41(G))
40.1.1.1 Y - where the development standards are modified for the sole purpose of…¶
size and minimum average-lot size. (Former Section CZ#A313-41(G)(2))
40.1.1.2 Y (x) - where, on the zoning maps, “x” indicates the minimum lot size, and…¶
any parcel results in a density consistent with the General Plan. As part of the subdivision action, a rezone to the appropriate Y(x) parcel size designation shall be required. As necessary to maintain consistency with the General Plan, the lot size specification requirements shall be a part of the enforceable restrictions of the subdivision. (Former Section CZ#A313-41(G)(3)) 40.1.1.3 (See also, the subsection, Special Combining Zone “SY.”)
313-41 (Section Reserved for Future Use) B SECTION B: REGULATIONS THAT APPLY IN ALL OR SEVERAL ZONES
Get a plain-English answer with a citation back to this text.
Ask AI about this code