Sec. 30-711. - Screening. — Fontana Zoning Code

All loading areas shall be separated from adjoining residential properties and public right-of-way by a building or masonry wall not less than eight feet in height. Other types of screening such as landscaping and berming may be required upon project review.

Sec. 30-712. - Turning radius.

All loading areas shall be located to provide adequate turning radius. Adequate turning radius means one which allows a vehicle to maneuver safely without backing into a street or without backing into the loading space from a street.

DIVISION 5. - PARKING STANDARDS FOR MOTORCYCLES AND BICYCLES

Sec. 30-713. - Motorcycle parking.

Employers are encouraged to provide motorcycle parking facilities. Motorcycle parking facilities should be placed on paved surfaces that are well lit and protected from potential damage by other vehicle traffic. The paved surface shall be concrete to prevent motorcycle kickstands from damaging the pavement and clearly identified for motorcycle usage.

Sec. 30-714. - Bicycle parking.

(a)

All employers shall provide bicycle parking. There shall be no bike parking on sidewalks unless additional area is provided which does not conflict with pedestrian access and entryways. Bicycle parking and facilities shall be located in an area on the site convenient to destination entrances for employees as well as for patrons. Bicycle parking facilities shall be located in highly visible areas to minimize theft and vandalism and shall not interfere with pedestrian traffic. Employers with 100 or more employees shall provide shower and locker facilities to encourage non-motorized travel such as bicycling and walking.

(b)

Bicycle parking facilities (racks or locks) shall be of a size and design which will accommodate the minimum number of required bicycles. The approval body may increase the minimum number of required bicycle spaces subject to or as mandated by regional or local transportation control measures.

Table 30-714

Bicycle Parking Requirements

Table 30-714 Bicycle Parking Requirements
	Use	Number of Spaces Required
1.	Regional Shopping Center	Five bicycle spaces are required for each mall entrance
2.	Retail Commercial Uses
	for buildings up to 5,000 square feet	Two bicycle spaces are required
	for buildings between 5,001 square feet and 15,000 square feet	Four bicycle spaces are required
	for buildings between 15,001 square feet to 50,000 square feet	One bicycle space is required for each 5,000 square feet
	for buildings above 50,000 square feet	One bicycle space is required for each 33 automobile parking spaces
3.	Restaurants
	Fast/Quick Food, Pizza Parlor	Four bicycle spaces are required
	Dinner House, Cofee Shop	Two bicycle spaces are required
4.	Commercial Recreation
	Bowling Alleys, Miniature Golf, Skating Rinks, Movie Theaters, Health Clubs, and Similar Activities	One bicycle space is required for each 33 automobile parking spaces
5.	Community Facilities

	Swim clubs, racquet and tennis clubs, community centers, and similar uses	One bicycle space is required for each 25 automobile parking spaces
	Libraries	One bicycle space is required for each 20 automobile parking spaces
	Government ofces	One bicycle space is required for each 50 employees
6.	Ofce Developments
	for buildings up to 50,000 square feet	Two bicycle spaces are required
	for buildings between 50,001 square feet and 100,000 square feet	Three bicycle spaces are required
	for buildings above 100,000 square feet	Five bicycle spaces are required
7.	Financial Institutions	Two bicycle spaces are required
8.	Hospitals	Five bicycle spaces are required
9.	Medical, Dental Ofces	Two bicycle spaces are required
10.	Churches	Four bicycle spaces are required
11.	Warehouse/Logistics/Distribution	One bicycle space is required for each 30,000 square feet of gross foor area

Sec. 30-715. - Reserved. ARTICLE XII. - SIGN REGULATIONS DIVISION 1. - GENERALLY