California City Municipal Code Art. 22 M2 - Heavy Industrial District

The M2, Heavy Industrial District is intended for urban areas designated for heavy industrial use in the General Plan.

( Ord. No. 12-714 , § 4, 11-20-2012)

The following uses are permitted in the M2 District:

(a) Uses permitted in the M1 District.

(b) If the entirety of the lot is at least one hundred fifty-five (155) from any portion of any family residential zone, then heavy manufacturing, assembly, and repair uses are allowed, including:

1. Apparel and other finished products made from fabrics and similar materials, et al. [SIC 230]

2. Automobile

3. Electronic and other electrical equipment and components, except computer equipment, et al. [SIC 360]

4. Energy [alternative] generation and related manufacturing and servicing

5. Fabricated metal products, except machinery and transportation equipment, et al. [SIC 340]

6. Food and kindred products, et al. [SIC 200 w/exception of 207 moved to M2 conditional use]

7. Furniture and fixtures, et al. [SIC 250]

8. Industrial and commercial machinery and computer equipment, et al. [SIC 350]

9. Leather and leather products, et al. [SIC 310]

10. Lumber and wood products, except furniture, et al. [SIC 240]

11. Machine tools

12. Machinery

13. Plastics

14. Primary metal industries, et al. [SIC 330 w/exception of 333 & 334 moved to M2 conditional use]

15. Printing, publishing, and allied industries, et al. [SIC 270]

16. Solar energy and windmill components [SIC 368]

17. Stone, clay, glass, and concrete products, et al. [SIC 320]

18. Textile mill products, et al. [SIC 220]

19. Tobacco products, et al. [SIC 210 w/exception of 214 moved to M1 permitted uses]

20. Transportation equipment, et al. [SIC 370]

(c) If the entirety of the lot is at least one hundred fifty-five (155) feet from any portion of any family residential zone, then industrial type sales and service uses are allowed, including:

1. Leather and fur finishing and dyeing

2. Meat processing and packaging, not including slaughtering and glue and size manufacture

3. Sandblasting

4. Solid waste recycling

5. Steam electric generating stations

6. Storage, sorting, collecting and baling of iron, junk, paper, rags or scrap.

( Ord. No. 12-714 , § 4, 11-20-2012; Ord. No. 18-759 , § 3, 1-9-2018)

The following uses are permitted in the M2 zone with a conditional use permit but only if the entirety of the lot is at least one hundred fifty-five (155) feet from any portion of any family residential zone:

1. Uses conditional in the M1 District

2. Asphalt and asphalt products manufacture

3. Automobile wrecking yards

4. Chemical and allied products, et al. [SIC 280]

5. Drop forges

6. Fats and oils [SIC 207]

7. Fish products processing and packaging

8. Gas and oil wells

9. Gas manufacture or storage

10. Gelatin, glue and size manufacture from animal or fish refuse

11. Incidental and accessory structures and uses located on the same site as a conditional use

12. Incineration or reduction of garbage, offal and dead animals

13. Linoleum and oil cloth manufacture

14. Magnesium foundries

15. Manure, peat and topsoil processing and storage

16. Motion picture production sound stages and backlot sets

17. Paper and allied products, et al. [SIC 260]

18. Petroleum refining and related industries, et al. [SIC 290]

19. Primary smelting and refining of nonferrous metals [SIC 333]

20. Quarries, mines and mills

21. Rifle and pistol ranges

22. Rolling mills

23. Rubber and miscellaneous plastics products, et al. [SIC 300 to include 303 retreading and recapping of tires and 304 rubber manufacture and recycling]

24. Secondary smelting and refining of nonferrous metals [SIC 334]

25. Sexually oriented businesses

26. Slag piles

27. Soap manufacture, including fat rendering

28. Solid waste transfer

29. Steam or other electrical generating plants

30. Stockyards, stock feeding yards and slaughterhouses

31. Storage of inflammable liquids

32. Storage of used building materials

33. Tallow manufacture

34. Wood and bones distillation

35. Wood pulp and fiber reduction and processing

36. Wrecking yards

( Ord. No. 12-714 , § 4, 11-20-2012; Ord. No. 18-759 , § 4, 1-9-2018)

Structure requirements (m2).

(a) The minimum lot size in an M2 District is one-half acre or twenty-one thousand seven hundred eighty (21,780) square feet.

(b) There are no minimum setback requirements in the M2 District.

(c) Where a lot in a Heavy Industrial (M2) district adjoins or is located across a street or alley from a residential district, said lot must be fenced with an approved sound wall on all residential side(s).

( Ord. No. 12-714 , § 4, 11-20-2012; Ord. No. 18-759 , § 5, 1-9-2018)

MANUFACTURING STANDARD INDUSTRIAL CODE ("SIC")

Uses described in the Standard Industrial Code ("SIC") U. S. Major Group for Manufacturing are more fully described below. The "*" indicates some numbers have been skipped because there is no entry for them.

( Ord. No. 12-714 , § 5, 11-20-2012)