Chapter 6 — REFERENCED ORGANIZATIONS AND STANDARDS
601 General — 2025 California Green Building Standards Code
California Green Building Standards Code (Title 24, Part 11) · 2025 edition · updated 2026-09-25 · California
Cite as: 2025 California Green Building Standards Code (Title 24, Part 11) § 601 · Effective January 1, 2026 · Official source: Building Standards Commission
601.1¶
This chapter lists the organizations and standards that are referenced in various sections of this document. The standards are listed according the promulgating agency of the standard.
| STANDARD ACRONYM or NUMBER |
STANDARD NAME or TITLE | REFERENCED SECTION |
|---|---|---|
| ~~**AABC **~~Associated Air Balance Council, 1518 K St NW, Washington, DC 20005www.aabc.com |
||
| National Standards, 1989 |
Total System Balance |
5.410.4.3.1, A5.410.5.3.1 |
www.acca.org |
||
| ANSI/ |
Residential Duct Systems | 4.507.2 |
| ANSI/ |
Residential Load Calculations | 4.507.2 |
| ANSI/ |
Residential Equipment Selection | 4.507.2 |
| ACI American Concrete Institute, 38800 Country Club Drive, Farmington Hills, MI 48331-3439 www.concrete.org |
||
| ACI CT-21 |
Concrete Terminology |
A5.405.5.2.1.1 |
| ~~**AHAM **~~Association of Home Appliance Manufacturers, 1119 19th Street NW, Suite 402, Washington, D.C. 20026-3627 http://www.aham.org |
||
| ANSI/ |
Household Electric Dishwashers | 202 |
| ASHRAEAmerican Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. 180 Technology Parkway NW, Peachtree Corners, GA 30092 www.ashrae.org |
||
| ANSI/ Standard 52.2- 2017 |
Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency by Particle Size |
5.504.1 |
www.asme.org |
||
| ASME A112.18.1 | Plumbing Supply Fittings | 5.303.6 |
| ASME A112.19.2 | Ceramic Plumbing Fixtures | WS-2 |
| ASME A112.19.14 |
Six-Liter Water Closets Equipped with a Dual Flushing Device |
WS-2, 5.303.6 |
| ~~**ASTM **~~ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2859 www.astm.org |
||
| ASTM C31/C31M-19 | Standard Practice for Making and Curing Concrete Test Specimens in the Field | A5.405.5.3.4 |
| ASTM C33 | Standard Specification for Concrete Aggregates | A5.405.5.3.2 |
| ASTM C150 | Standard Specification for Portland Cement | A5.405.5.1 |
| ASTM C595 | Standard Specification for Blended Hydraulic Cements | A5.405.5.1 |
| ASTM C618 | Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
A5.405.5.2.1 |
| ASTM C989 | Standard Specification for Slag Cement for Use in Concrete and Mortars | A5.405.5.2.1 |
| ASTM C1157 | Standard Performance Specification for Hydraulic Cement | A5.405.5.1 |
| ASTM C1240 | Standard Specification for Silica Fume Used in Cementitious Mixtures | A5.405.5.2.1 |
| ASTM C1371-98 | Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers |
A5.106.11.2.2 |
| ASTM C1549-09(2014) | Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer |
A4.106.7, A5.106.11.1 |
| ASTM C1602 | Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete |
A5.405.5.3.2.3 |
| ASTM C1697 | Standard Specification for Blended Supplementary Cementitious Materials | A5.405.5.2.1 |
| ASTM C1798/C1798M-19 | Standard Specification for Returned Fresh Concrete for Use in a New Batch of Ready-Mixed Concrete |
A5.405.5.3.5 |
| ASTM C1866/C1866M-20 | Standard Specification for Ground-Glass Pozzolan for Use in Concrete | A5.405.5.2.1 |
REFERENCED ORGANIZATIONS AND STANDARDS
| STANDARD ACRONYM or NUMBER |
STANDARD NAME or TITLE | REFERENCED SECTION |
|---|---|---|
| ~~ASTM~~ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2859 www.astm.org |
||
| ASTM D7612-2021 | Standard Practice for Categorizing Wood and Wood-Based Products According to Their Fiber Sources |
A5.405.2.1 |
| ASTM E90 | Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements |
5.507.4 |
| ASTM E408-02 | Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection- Meter Techniques |
A5.10, 6.11.2.2 |
| ASTM E413 | Classification for Rating Sound Insulation | 5.507.4 |
| ASTM E1332 | Standard Classification for Rating Outdoor-Indoor Sound Attenuation | 5.507.4 |
| ASTM E1333-14 | Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber |
Tables 4.504.5, 5.504.4.5, 5.504.8.5 |
| ASTM E1903-11 | Standard Practice for Environmental Site Assessments: Phase II Environmental Site Assessment Process |
A5.103.2.1 |
| ASTM E1918-06(2015) | Standard Test Method for Measuring Solar Reflectance of Horizontal and Low- Sloped Surfaces in the Field |
A4.106.7 |
| ASTM E1918-16 (2016) | Standard Test Method for Measuring Solar Reflectance of Horizontal and Low- Sloped Surfaces in the Field |
A5.106.11.1 |
| ASTM E1980-11 | Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low- Sloped Opaque Surfaces |
A4.106.5.3, A5.106.11.2.3 |
| ASTM E2921-2022 |
Standard Practice for Minimum Criteria for Comparing Whole Building Life Cycle Assessments for Use with Building Codes, Standards, and Rating Systems |
5.409.2, A5.409.2 |
www.csa.ca |
||
| CSA B125.1 | Plumbing supply fittings | 4.504.5.1 |
| CSA O121 | Douglas fir plywood | 4.504.5.1 |
| CSA O151 | Canadian softwood plywood | 4.504.5.1 |
| CSA O153 | Poplar plywood | 4.504.5.1 |
| CSA O325 |
Construction sheathing |
4.504.5.1 |
| ~~EN~~European Standards, European and International standards online store - European Standards www.en-standard.eu |
||
| EN 15804-2012 + A2:2019 | Sustainability of construction works. Environmental product declarations. Core rules for the product category of construction products |
5.409.2, A5.409.2.1, A5.409.2.2 |
| EN 15978:2011 |
Sustainability of construction works. Assessment of environmental performance of buildings. Calculation method |
5.409.2, A5.409.2.1, A5.409.2.2 |
iapmo@iapmo.org |
||
| IAPMO Z124.9 |
Plastic Plumbing Fixtures |
5.303.6 |
http://www.ies.org |
||
| IES TM-15-11 |
Luminaire Classification System for Outdoor Luminaires |
5.10, 6.6, A4.106.10 |
https://www.iso.org |
||
| ISO 14040-2006+A1:2020 | Environmental management — Life cycle assessment — Principles and framework | 5.409.2, A5.409.2.1, A5.409.2.2 |
| ISO 14044-2006+A1:2020 | Environmental management — Life cycle assessment — Requirements and guidelines |
5.409.2, A5.409.2.1, A5.409.2.2 |
| ISO 21930-2017 | Sustainability in buildings and civil engineering works — Core rules for environmental product declarations of construction products and services |
5.409.2, A5.409.2.1, A5.409.2.2 |
| ISO 21931-2017 |
Sustainability in buildings and civil engineering works — Framework for methods of assessment of the environmental, social and economic performance of construction works as a basis for sustainability assessment |
5.409.2, A5.409.2.1, A5.409.2.2 |
| ~~**NEBB **~~National Environmental Balancing Bureau, 8575 Grovemont Cir, Gaithersburg, MD 20877 http://nebb.org/ |
||
| Procedural Standards, 1983 | Procedural Standards | 5.410.4.3.1 |
6-4 2025 CALIFORNIA GREEN BUILDING STANDARDS CODE
REFERENCED ORGANIZATIONS AND STANDARDS
| STANDARD ACRONYM or NUMBER |
STANDARD NAME or TITLE | REFERENCED SECTION |
|---|---|---|
http://www.nsf.org/ |
||
| NSF/ |
Sustainability Assessment for Carpet |
4.504.3 |
http://www.tabbcertified.org/ |
||
| National Standards, 2003 |
National Standards |
5.410.4.3.1 |
http://www.epa.gov/ |
||
| WaterSense | WaterSense Product Specifications | 4.303.1 |
6-6 2025 CALIFORNIA GREEN BUILDING STANDARDS CODE
CALIFORNIA GREEN BUILDING STANDARDS CODE – MATRIX ADOPTION TABLE
CHAPTER 7 – INSTALLER AND SPECIAL INSPECTOR QUALIFICATIONS
(Matrix Adoption Tables are nonregulatory, intended only as an aid to the code user. See Chapter 1 for state agency authority and building applications.)
| Adopting agency | BSC | BSC- CG |
SFM | HCD | DSA | OSHPD | BSCC | DPH | AGR | DWR | CEC | CA | SL | SLC | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Adopting agency | BSC | BSC- CG |
SFM | 1 | 2 | 1/AC | AC | SS | 1 | 1R | 2 | 3 | 4 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 |
| Adopt entire CA chapter | X | |||||||||||||||||||||
| Adopt entire chapter as amended (amended sections listed below) |
||||||||||||||||||||||
| Adopt only those sections that are listed below |
X | |||||||||||||||||||||
| Chapter/ |
||||||||||||||||||||||
| 702.2 | X | |||||||||||||||||||||
| 703.1 | X |
7-2 2025 CALIFORNIA GREEN BUILDING STANDARDS CODE
Explained in plain English
Guides that cite this section.
- How to look up specific plumbing/product standards (NSF, CSA, ASME) in Chapter 6
- How does the Matrix Adoption Table affect which referenced standards apply to my project?
- What does Section 601.1 list and how do I use the Chapter 6 table of referenced standards?
- Which material/industry standards (ACI, ASTM, etc.) are indexed in Chapter 6 for building materials?
Get a plain-English answer with a citation back to this text.
Ask AI about this code