Skip to content

Woodland · Zoning · DX-4

Woodland DX-4 zoning: height, setbacks and lot size

In Woodland's DX-4 zone, generally buildings can be up to 65 ft tall and the front setback is 5 ft, with the conditions listed below (Woodland code, read October 2026).

Key points

  • Maximum building height: 65 ft (a minimum height of 25 ft also applies)
  • Minimum front setback: 5 ft (front and street side; also a maximum of 15 ft)
  • Minimum side setback: 0 ft
  • Minimum rear setback: 0 ft
  • Maximum lot coverage: 70% (may be increased for a parcel in a master or precise plan with community features)
  • Maximum floor area ratio (FAR): 4.0 (a minimum FAR of 1.0 also applies; extra FAR may be granted for community benefits)

DX-4 is a zoning district in Woodland. Every value below was read from the Woodland Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in DX-4

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
65 ft
Applies: a minimum height of 25 ft also applies
§ 17.28.030 · code text
Table row “Principal Structure”, column “DX-4”: Min. 25 ft., Max 65 ft.
Minimum front setback
5 ft
Applies: front and street side; also a maximum of 15 ft
§ 17.28.030 · code text
Table row “Front and Street Side”, column “DX-4”: Min. 5 ft.; Max. 15 ft. (C)
Minimum side setback
0 ft
§ 17.28.030 · code text
Table row “Interior Side”, column “DX-4”: 0 ft.
Minimum rear setback
0 ft
§ 17.28.030 · code text
Table row “Rear”, column “DX-4”: Min. 0 ft.; Min. 30 ft. adjacent to railroad centerline
Maximum lot coverage
70%
Applies: may be increased for a parcel in a master or precise plan with community features
§ 17.28.030 · code text
Table row “Max. Lot Coverage”, column “DX-4”: 70% (B)
Maximum floor area ratio (FAR)
4.0
Applies: a minimum FAR of 1.0 also applies; extra FAR may be granted for community benefits
§ 17.28.030 · code text
Table row “FAR of Residential and Nonresidential Combined”, column “DX-4”: Min. 1.0, Max. 4.0 (A)

Uses in DX-4

Uses the code's use tables allow in DX-4, or allow with a permit. Each links to its page with the code section.

When a different number applies

The code sets other values for particular lots, buildings or locations in DX-4:

  • Minimum rear setback: 30 ft — adjacent to railroad centerline § 17.28.030

Not on this page

We did not find a general stories, lot size, density limit for DX-4 in the zoning tables we read. The code may still set one elsewhere — check the Woodland Municipal Code.

Other Woodland zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Woodland's DX-4 zone?

65 ft (a minimum height of 25 ft also applies) — Woodland Municipal Code § 17.28.030.

What is the minimum front setback in Woodland's DX-4 zone?

5 ft (front and street side; also a maximum of 15 ft) — Woodland Municipal Code § 17.28.030.

What is the minimum side setback in Woodland's DX-4 zone?

0 ft — Woodland Municipal Code § 17.28.030.

What is the minimum rear setback in Woodland's DX-4 zone?

0 ft — Woodland Municipal Code § 17.28.030.

What is the maximum lot coverage in Woodland's DX-4 zone?

70% (may be increased for a parcel in a master or precise plan with community features) — Woodland Municipal Code § 17.28.030.

General information, not legal advice.

Ask about a Woodland property in DX-4

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Woodland