Skip to content

Turlock · Zoning · R-L4.5

Turlock R-L4.5 zoning: height, setbacks and lot size

In Turlock's R-L4.5 zone, buildings can be up to 35 ft tall, the front setback is 15 ft and the minimum lot size is 4,500 sq ft (Turlock code, read October 2026).

Key points

  • Maximum building height: 35 ft
  • Minimum front setback: 15 ft
  • Minimum side setback: 0 to 10 ft (One side may be 0 if the other is 10 ft; otherwise both at least 5 ft; 5 ft where abutting another zone)
  • Minimum rear setback: 10 ft
  • Minimum lot size: 4,500 sq ft
  • Maximum density: 5.0 to 10.0 units per acre (the code sets a range: at least 5.0, at most 10.0)

R-L4.5 (Residential Low Density 4.5) is a zoning district in Turlock. Every value below was read from the Turlock Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in R-L4.5

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
35 ft
§ 9-3-203 · code text
Table row “Maximum height (ft.)”, column “R-L4.5”: 35
Minimum front setback
15 ft
§ 9-3-203 · code text
Table row “Front (ft.)”, column “R-L4.5”: 15
Minimum side setback
0 to 10 ft
Applies: One side may be 0 if the other is 10 ft; otherwise both at least 5 ft; 5 ft where abutting another zone
§ 9-3-203 · code text
Table row “Side (ft.)”, column “R-L4.5”: 0 – 10
Minimum rear setback
10 ft
§ 9-3-203 · code text
Table row “Rear (ft.)”, column “R-L4.5”: 10
Minimum lot size
4,500 sq ft
§ 9-3-203 · code text
Table row “Minimum lot size (sf)”, column “R-L4.5”: 4,500
Maximum density
5.0 to 10.0 units per acre
Applies: the code sets a range: at least 5.0, at most 10.0
§ 9-3-203 · code text
Table row “Lot density ranges (unit/acre)”, column “R-L4.5”: 5.0 – 10.0

When a different number applies

The code sets other values for particular lots, buildings or locations in R-L4.5:

  • Minimum side setback: 5 ft — Otherwise both side yards shall be a minimum of five (5') feet. § 9-3-203
  • Minimum rear setback: 5 ft — May be reduced to 5 feet for a length not to exceed one-third of the parcel width. § 9-3-203

Not on this page

We did not find a general stories, lot coverage, FAR limit for R-L4.5 in the zoning tables we read. The code may still set one elsewhere — check the Turlock Municipal Code.

Other Turlock zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Turlock's R-L4.5 zone?

35 ft — Turlock Municipal Code § 9-3-203.

What is the minimum front setback in Turlock's R-L4.5 zone?

15 ft — Turlock Municipal Code § 9-3-203.

What is the minimum side setback in Turlock's R-L4.5 zone?

0 to 10 ft (one side may be 0 if the other is 10 ft; otherwise both at least 5 ft; 5 ft where abutting another zone) — Turlock Municipal Code § 9-3-203.

What is the minimum rear setback in Turlock's R-L4.5 zone?

10 ft — Turlock Municipal Code § 9-3-203.

What is the minimum lot size in Turlock's R-L4.5 zone?

4,500 sq ft — Turlock Municipal Code § 9-3-203.

General information, not legal advice.

Ask about a Turlock property in R-L4.5

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Turlock