Skip to content

Temecula · Zoning · H

Temecula H zoning: height, setbacks and lot size

In Temecula's H zone, buildings can be up to 50 ft tall and the front setback is 20 ft average (Temecula code, read October 2026).

Key points

  • Maximum building height: 50 ft
  • Minimum front setback: 20 ft average
  • Minimum side setback: Combined both sides at least 10 ft; zero on one side and 10 ft on the other is allowed (The distance between adjacent structures must be at least 10 ft)
  • Minimum rear setback: 20 ft
  • Maximum lot coverage: 30%
  • Maximum density: 13.0 to 20.0 units per net acre (the code sets a range: at least 13.0, at most 20.0)

H is a zoning district in Temecula. Every value below was read from the Temecula Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in H

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
50 ft
§ 17.06.040 · code text
Table row “Maximum height (feet)”, column “H”: 50
Minimum front setback
20 ft average
§ 17.06.040 · code text
Table row “Minimum front yard (feet)”, column “H”: 20 Avg. 4
Minimum side setback
Combined both sides at least 10 ft; zero on one side and 10 ft on the other is allowed
Applies: The distance between adjacent structures must be at least 10 ft
§ 17.06.040 · code text
M and H zoning districts: The combined interior side yard setbacks shall not be less than ten feet and the distance between adjacent structures shall not be less than ten feet. This is intended to permit a zero lot line arrangement with a zero setback on one side yard and ten feet on the opposite side yard.
Minimum rear setback
20 ft
§ 17.06.040 · code text
Table row “Minimum rear yard (feet)”, column “H”: 20
Maximum lot coverage
30%
§ 17.06.040 · code text
Table row “Maximum percent of lot coverage”, column “H”: 30%
Maximum density
13.0 to 20.0 units per net acre
Applies: the code sets a range: at least 13.0, at most 20.0
§ 17.06.040 · code text
Table row “Density range (dwelling units per net acre 1 )”, column “H”: 13.0-20.0

Uses in H

Uses the code's use tables allow in H, or allow with a permit. Each links to its page with the code section.

When a different number applies

The code sets other values for particular lots, buildings or locations in H:

  • Minimum front setback: 15 ft — Dwelling units with entrances having direct access to the street, where the predominant features fronting the street are windows and the front door § 17.06.040

Not on this page

We did not find a general stories, lot size, FAR limit for H in the zoning tables we read. The code may still set one elsewhere — check the Temecula Municipal Code.

Other Temecula zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Temecula's H zone?

50 ft — Temecula Municipal Code § 17.06.040.

What is the minimum front setback in Temecula's H zone?

20 ft average — Temecula Municipal Code § 17.06.040.

What is the minimum side setback in Temecula's H zone?

Combined both sides at least 10 ft; zero on one side and 10 ft on the other is allowed (the distance between adjacent structures must be at least 10 ft) — Temecula Municipal Code § 17.06.040.

What is the minimum rear setback in Temecula's H zone?

20 ft — Temecula Municipal Code § 17.06.040.

What is the maximum lot coverage in Temecula's H zone?

30% — Temecula Municipal Code § 17.06.040.

General information, not legal advice.

Ask about a Temecula property in H

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Temecula