Skip to content

San Jacinto · Zoning · RH

San Jacinto RH zoning: height, setbacks and lot size

In San Jacinto's RH zone, generally buildings can be up to 45 ft tall, the front setback is 20 ft and the minimum lot size is 20,000 sq. ft., with the conditions listed below (San Jacinto code, read October 2026).

Key points

  • Maximum building height: 45 ft (Primary Structure)
  • Minimum front setback: 20 ft (Multi-family projects, single-story building; taller buildings need more (see below))
  • Minimum side setback: 10 ft (Multi-family projects, single-story building; taller buildings need more (see below))
  • Minimum rear setback: 10 ft (Multi-family projects, single-story building; taller buildings need more (see below))
  • Minimum lot size: 20,000 sq. ft.
  • Maximum density: 22.0 units per gross acre

RH is a zoning district in San Jacinto. Every value below was read from the San Jacinto Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in RH

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
45 ft
Applies: Primary Structure
§ 17.215.030 · code text
Table row “Primary Structure”, column “RH”: 45 ft.
Minimum front setback
20 ft
Applies: Multi-family projects, single-story building; taller buildings need more (see below)
§ 17.420.050 · code text
Table row “Front”, column “Standard”: 20 ft. minimum — Single-story 25 ft. minimum — Two-story or greater
Minimum side setback
10 ft
Applies: Multi-family projects, single-story building; taller buildings need more (see below)
§ 17.420.050 · code text
Table row “Side”, column “Standard”: 10 ft. minimum — Single-story 15 ft. minimum — Two-story 25 ft minimum — Three story or greater
Minimum rear setback
10 ft
Applies: Multi-family projects, single-story building; taller buildings need more (see below)
§ 17.420.050 · code text
Table row “Rear”, column “Standard”: 10 ft. minimum — Single-story 15 ft. minimum — Two-story 25 ft minimum — Three story or more greater
Minimum lot size
20,000 sq. ft.
§ 17.215.030 · code text
Table row “Parcel Area”, column “RH”: 20,000 sq. ft.
Maximum density
22.0 units per gross acre
§ 17.215.030 · code text
Table row “Maximum”, column “RH”: 22.0

Uses in RH

Uses the code's use tables allow in RH, or allow with a permit. Each links to its page with the code section.

When a different number applies

The code sets other values for particular lots, buildings or locations in RH:

  • Minimum front setback: 25 ft — Multi-family projects, two-story building or taller § 17.420.050
  • Minimum side setback: 15 ft — Multi-family projects, two-story building § 17.420.050
  • Minimum side setback: 25 ft — Multi-family projects, three-story building or taller § 17.420.050
  • Minimum rear setback: 15 ft — Multi-family projects, two-story building § 17.420.050
  • Minimum rear setback: 25 ft — Multi-family projects, three-story building or taller § 17.420.050

Not on this page

We did not find a general stories, lot coverage, FAR limit for RH in the zoning tables we read. The code may still set one elsewhere — check the San Jacinto Municipal Code.

Other San Jacinto zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in San Jacinto's RH zone?

45 ft (primary Structure) — San Jacinto Municipal Code § 17.215.030.

What is the minimum front setback in San Jacinto's RH zone?

20 ft (multi-family projects, single-story building; taller buildings need more (see below)) — San Jacinto Municipal Code § 17.420.050.

What is the minimum side setback in San Jacinto's RH zone?

10 ft (multi-family projects, single-story building; taller buildings need more (see below)) — San Jacinto Municipal Code § 17.420.050.

What is the minimum rear setback in San Jacinto's RH zone?

10 ft (multi-family projects, single-story building; taller buildings need more (see below)) — San Jacinto Municipal Code § 17.420.050.

What is the minimum lot size in San Jacinto's RH zone?

20,000 sq. ft. — San Jacinto Municipal Code § 17.215.030.

General information, not legal advice.

Ask about a San Jacinto property in RH

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on San Jacinto