Salinas · Zoning · R-H-1.8
Salinas R-H-1.8 zoning: height, setbacks and lot size
In Salinas's R-H-1.8 zone, buildings can be up to 45 ft tall, the front setback is 15 ft and the minimum lot size is 7,200 sq. ft. (Salinas code, read October 2026).
Key points
- Maximum building height: 45 ft
- Minimum front setback: 15 ft
- Minimum side setback: 10 ft
- Minimum rear setback: 10 ft
- Minimum lot size: 7,200 sq. ft.
- Maximum floor area ratio (FAR): 0.40 (Nonresidential FAR)
- Maximum density: 1 unit per 1,800 sq. ft.
R-H-1.8 (Residential High Density (R-H) District) is a zoning district in Salinas. Every value below was read from the Salinas Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in R-H-1.8
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 45 ft § 37-30.170 · code textTable row “Height—Maximum”, column “R-H-1.8”: 45 ft. |
|---|---|
| Minimum front setback | 15 ft § 37-30.170 · code textTable row “Front”, column “R-H-1.8”: 15 ft. |
| Minimum side setback | 10 ft § 37-30.170 · code textTable row “Interior”, column “R-H-1.8”: 10 ft. |
| Minimum rear setback | 10 ft § 37-30.170 · code textTable row “Rear”, column “R-H-1.8”: 10 ft. |
| Minimum lot size | 7,200 sq. ft. § 37-30.170 · code textTable row “Lot Size—Minimum”, column “R-H-1.8”: 7,200 sq. ft. |
| Maximum floor area ratio (FAR) | 0.40 Applies: Nonresidential FAR § 37-30.170 · code textTable row “Nonresidential FAR”, column “R-H-1.8”: 0.40 |
| Maximum density | 1 unit per 1,800 sq. ft. § 37-30.170 · code textTable row “Lot Area per Dwelling Unit—Minimum”, column “R-H-1.8”: 1,800 sq. ft. |
Not on this page
We did not find a general stories, lot coverage limit for R-H-1.8 in the zoning tables we read. The code may still set one elsewhere — check the Salinas Municipal Code.
Other Salinas zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Salinas's R-H-1.8 zone?
45 ft — Salinas Municipal Code § 37-30.170.
What is the minimum front setback in Salinas's R-H-1.8 zone?
15 ft — Salinas Municipal Code § 37-30.170.
What is the minimum side setback in Salinas's R-H-1.8 zone?
10 ft — Salinas Municipal Code § 37-30.170.
What is the minimum rear setback in Salinas's R-H-1.8 zone?
10 ft — Salinas Municipal Code § 37-30.170.
What is the minimum lot size in Salinas's R-H-1.8 zone?
7,200 sq. ft. — Salinas Municipal Code § 37-30.170.
General information, not legal advice.
Ask about a Salinas property in R-H-1.8
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question