Skip to content

Porterville · Zoning · RS-2

Porterville RS-2 zoning: height, setbacks and lot size

In Porterville's RS-2 zone, buildings can be up to 35 ft tall, the front setback is 15 ft and the minimum lot size is 6,000 sq. ft. (Porterville code, read October 2026).

Key points

  • Maximum building height: 35 ft
  • Minimum front setback: 15 ft
  • Minimum side setback: 5 ft
  • Minimum rear setback: 5 ft
  • Minimum lot size: 6,000 sq. ft.
  • Maximum lot coverage: 45%
  • Maximum density: 7.5 units/net acre

RS-2 is a zoning district in Porterville. Every value below was read from the Porterville Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in RS-2

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
35 ft
§ 201.03 · code text
Table row “Maximum height (ft.)”, column “RS-2”: 35
Minimum front setback
15 ft
§ 201.03 · code text
Table row “Residence (front)”, column “RS-2”: 15
Minimum side setback
5 ft
§ 201.03 · code text
Table row “Interior side”, column “RS-2”: 5
Minimum rear setback
5 ft
§ 201.03 · code text
Table row “Rear”, column “RS-2”: 5
Minimum lot size
6,000 sq. ft.
§ 201.03 · code text
Table row “Minimum lot area (sq. ft.)”, column “RS-2”: 6,000
Maximum lot coverage
45%
§ 201.03 · code text
Table row “Maximum building coverage (% of lot)”, column “RS-2”: 45
Maximum density
7.5 units/net acre
§ 201.03 · code text
Table row “Maximum density (units/net acre)”, column “RS-2”: 7.5

Uses in RS-2

Uses the code's use tables allow in RS-2, or allow with a permit. Each links to its page with the code section.

When a different number applies

The code sets other values for particular lots, buildings or locations in RS-2:

  • Minimum side setback: 12 ft — reversed corner lot; street side yard § 201.03
  • Minimum rear setback: 15 ft — school, government, or other institutional use; building adjacent to an RS district § 201.03

Not on this page

We did not find a general stories, FAR limit for RS-2 in the zoning tables we read. The code may still set one elsewhere — check the Porterville Municipal Code.

Other Porterville zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Porterville's RS-2 zone?

35 ft — Porterville Municipal Code § 201.03.

What is the minimum front setback in Porterville's RS-2 zone?

15 ft — Porterville Municipal Code § 201.03.

What is the minimum side setback in Porterville's RS-2 zone?

5 ft — Porterville Municipal Code § 201.03.

What is the minimum rear setback in Porterville's RS-2 zone?

5 ft — Porterville Municipal Code § 201.03.

What is the minimum lot size in Porterville's RS-2 zone?

6,000 sq. ft. — Porterville Municipal Code § 201.03.

General information, not legal advice.

Ask about a Porterville property in RS-2

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Porterville