McFarland · Zoning · M-1
McFarland M-1 zoning: height, setbacks and lot size
In McFarland's M-1 zone, generally buildings can be up to 35 ft (2 stories) tall and the front setback is 40 ft, with the conditions listed below (McFarland code, read October 2026).
Key points
- Maximum building height: 35 ft
- Maximum number of stories: 2 stories
- Minimum front setback: 40 ft (measured from the street centerline)
- Minimum side setback: None required (buildings used only for dwellings follow the R-4 zone rules)
- Minimum rear setback: None required (buildings used only for dwellings follow the R-4 zone rules)
M-1 is a zoning district in McFarland. Every value below was read from the McFarland Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in M-1
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 35 ft § 17.84.030 · code textTwo stories and not to exceed thirty-five feet. |
|---|---|
| Maximum number of stories | 2 stories § 17.84.030 · code textTwo stories and not to exceed thirty-five feet. |
| Minimum front setback | 40 ft Applies: measured from the street centerline § 17.84.040 · code textAll buildings shall be located not nearer than forty feet from the centerline of a street. |
| Minimum side setback | None required Applies: buildings used only for dwellings follow the R-4 zone rules § 17.84.050 · code textNone, except all buildings used exclusively for dwelling purposes shall comply with the provisions of the R-4 zone. |
| Minimum rear setback | None required Applies: buildings used only for dwellings follow the R-4 zone rules § 17.84.060 · code textNone, except all buildings used exclusively for dwelling purposes shall comply with the provisions of the R-4 zone. |
When a different number applies
The code sets other values for particular lots, buildings or locations in M-1:
- Minimum front setback: 45 ft — along a secondary highway in the city or county highway plan; measured from the highway centerline § 17.84.040
- Minimum front setback: 55 ft — along a major highway in the city or county highway plan; measured from the highway centerline § 17.84.040
Not on this page
We did not find a general lot size, lot coverage, FAR, density limit for M-1 in the zoning tables we read. The code may still set one elsewhere — check the McFarland Municipal Code.
Other McFarland zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in McFarland's M-1 zone?
35 ft — McFarland Municipal Code § 17.84.030.
What is the maximum number of stories in McFarland's M-1 zone?
2 stories — McFarland Municipal Code § 17.84.030.
What is the minimum front setback in McFarland's M-1 zone?
40 ft (measured from the street centerline) — McFarland Municipal Code § 17.84.040.
What is the minimum side setback in McFarland's M-1 zone?
None required (buildings used only for dwellings follow the R-4 zone rules) — McFarland Municipal Code § 17.84.050.
What is the minimum rear setback in McFarland's M-1 zone?
None required (buildings used only for dwellings follow the R-4 zone rules) — McFarland Municipal Code § 17.84.060.
General information, not legal advice.
Ask about a McFarland property in M-1
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question