Skip to content

Colfax · Zoning · R-1-5

Colfax R-1-5 zoning: height, setbacks and lot size

In Colfax's R-1-5 zone, generally buildings can be up to 30 ft (2½ stories) tall and the minimum lot size is 5,000 sq. ft., with the conditions listed below (Colfax code, read October 2026).

Key points

  • Maximum building height: 30 ft (The code gives this limit as 2½ stories or 30 ft)
  • Maximum number of stories: 2½ stories (The code gives this limit as 2½ stories or 30 ft)
  • Minimum lot size: 5,000 sq. ft.
  • Maximum density: 1 dwelling per lot

R-1-5 is a zoning district in Colfax. Every value below was read from the Colfax Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in R-1-5

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
30 ft
Applies: The code gives this limit as 2½ stories or 30 ft
The code attaches note 8 to this value. This page does not show it; read the code before relying on the number.
§ 17.72.030 · code text
Table row “Maximum Building Height (8)”, column “R-1”: 2½ stories or 30 ft.
Maximum number of stories
2½ stories
Applies: The code gives this limit as 2½ stories or 30 ft
The code attaches note 8 to this value. This page does not show it; read the code before relying on the number.
§ 17.72.030 · code text
Table row “Maximum Building Height (8)”, column “R-1”: 2½ stories or 30 ft.
Minimum lot size
5,000 sq. ft.
§ 17.72.030 · code text
Table row “Minimum Parcel Area”, column “R-1”: 5,000 sq. ft.
Maximum density
1 dwelling per lot
The code attaches note 9 to this value. This page does not show it; read the code before relying on the number.
§ 17.72.030 · code text
Table row “Residential Density”, column “R-1”: 1 dwelling per lot (9)

Not on this page

We did not find a general front setback, side setback, rear setback, lot coverage, FAR limit for R-1-5 in the zoning tables we read. The code may still set one elsewhere — check the Colfax Municipal Code.

Other Colfax zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Colfax's R-1-5 zone?

30 ft (the code gives this limit as 2½ stories or 30 ft) — Colfax Municipal Code § 17.72.030. The code attaches notes or conditions to this value; read the section before relying on it.

What is the maximum number of stories in Colfax's R-1-5 zone?

2½ stories (the code gives this limit as 2½ stories or 30 ft) — Colfax Municipal Code § 17.72.030. The code attaches notes or conditions to this value; read the section before relying on it.

What is the minimum lot size in Colfax's R-1-5 zone?

5,000 sq. ft. — Colfax Municipal Code § 17.72.030.

What is the maximum density in Colfax's R-1-5 zone?

1 dwelling per lot — Colfax Municipal Code § 17.72.030. The code attaches notes or conditions to this value; read the section before relying on it.

General information, not legal advice.

Ask about a Colfax property in R-1-5

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Colfax