CBC · California Building Code
What compliance methods are available (prescriptive, work-area, performance)?
When you alter, add to, or change occupancy of an existing building in California you must pick one compliance route: the prescriptive Chapter 5 route, the work‑area Chapters 6–12 route (Level 1/2/3 based on percent of area), or the performance Chapter 13 evaluation route. § 301.3.1, § 301.3.2 and § 301.3.3 explain the choice; Chapter 13 may not be adopted locally, so check with the authority having jurisdiction before planning your submittal.
Last reviewed: July 5, 2026
What the code requires
For any alteration, addition or change of occupancy to an existing building the applicant must choose one—and only one—of the compliance methods the California Existing Building Code (CEBC) provides: the Prescriptive Compliance Method (Chapter 5), the Work‑Area Compliance Method (Chapters 6–12), or the Performance Compliance Method (Chapter 13). The CEBC explicitly identifies the prescriptive route in § 301.3.1, the work‑area route in § 301.3.2, and the performance route in § 301.3.3; each route, when complied with, is “considered in compliance” with the code.
Requirements in detail
1) Prescriptive Compliance Method (Chapter 5)
- What it is: A rule‑by‑rule (packaged) approach that directs the required upgrades and repairs by specific provisions and triggers. It is the Chapter 5 path referenced and authorized by § 301.3.1.
- When practitioners use it: When the applicant elects the prescriptive path for the proposed work; Chapter 5 contains the prescriptive lists and upgrade triggers.
- Typical deliverables: Drawings and specifications showing the Chapter 5 provisions applied to the altered elements and evidence (calculations, schedules) of the prescribed upgrades.
2) Work‑Area Compliance Method (Chapters 6–12)
- What it is: A scope‑based method that classifies the work (Level 1, Level 2, Level 3, additions, change of occupancy) and applies requirements scaled to the classification and extent of the work. The method is authorized by § 301.3.2 and described throughout Chapters 6–12.
- Key classification notes: Level 1 covers limited replacement/covering only; Level 2 covers reconfiguration up to and including 50% of building area or addition of systems; Level 3 covers alterations exceeding 50% of aggregate area.
- Important structural triggers: When the work area exceeds 50% of the building and the building falls into certain seismic or construction categories, specific seismic evaluation or retrofit actions are required (see the seismic/structural provisions cited in the CEBC).
3) Performance Compliance Method (Chapter 13)
- What it is: An evaluation path that scores an existing building across a set of safety parameters to demonstrate an overall minimum safety score rather than forcing full conformance with new‑construction provisions. Chapter 13 is the controlling chapter for this method and is referenced in § 301.3.3.
- How it works: Chapter 13 uses a numerical scoring system (21 safety parameters noted in the chapter) to determine if proposed work maintains or increases the existing degree of public safety.
- Adoption note: Chapter 13 (the Performance Compliance Method) is not adopted by some state agencies and “may be available for adoption by local ordinance”; check jurisdictional adoption before relying on Chapter 13.
Decision table (quick comparison)
| Decision dimension | Typical threshold / value | What you must provide | Code reference |
|---|---|---|---|
| Prescriptive route chosen | Applicant elects Chapter 5 approach | Apply Chapter 5 prescribed upgrades; provide documentation per Chapter 5 | § 301.3.1 |
| Work‑Area route chosen | Work classified Level 1/2/3 (Level 2 ≤50% area; Level 3 >50%) | Follow Chapters 6–12 requirements for the classification; address specified triggers (eg. structural, egress) | § 301.3.2; Chapters 6–12 |
| Performance route chosen | Applicant elects Chapter 13; jurisdiction must allow it | Perform Chapter 13 evaluation (21 parameters/score) and submit scoring documentation | § 301.3.3; Chapter 13 (§1301–§1302) |
Exceptions & special cases
- Combination of methods: The CEBC requires the applicant to select one compliance method; Sections 301.3.1–301.3.3 are not to be applied in combination with each other except as specifically permitted by the enforcement agency. Confirm scope with the authority having jurisdiction (AHJ).
- OSHPD / hospitals and special state agencies: For buildings regulated by OSHPD (certain hospitals, correctional treatment centers, etc.), different adopted sections and chapters control—see the OSHPD references and the CEBC exceptions that remove some buildings from the general Chapter 3–5 pathways. Verify which CEBC chapters are applicable for OSHPD projects.
- Chapter 13 adoption: Chapter 13’s performance method is explicitly identified as “Not adopted by the State of California” in the CEBC text and may be available only by local ordinance—confirm local adoption before planning a Chapter 13 compliance strategy.
- Historic / pre‑1973 buildings and special prescriptive provisions: The CEBC contains special provisions for nonconforming and historic buildings (see CEBC companion sections). If proposing work covered by those special rules, consult the applicable CEBC subsections.
Common mistakes
- Assuming Chapter 13 is automatically available statewide — it may not be adopted by the enforcing state agency; always verify with the AHJ.
- Combining methods without AHJ approval — the code forbids mixing §§ 301.3.1–301.3.3 unless the enforcement agency permits it.
- Misclassifying the work area (Level 2 vs Level 3) and thereby missing structural upgrade triggers that apply when the work area exceeds 50% of building area. The 50% threshold recurs in the CEBC triggers.
- Failing to check state‑agency exceptions (OSHPD, DSA, HCD) that change which chapters or sections are applicable.
Worked example — concrete scenario
Scenario: A 10,000 ft² commercial building will have interior reconfiguration that affects 4,500 ft².
- Determine percentage: 4,500 / 10,000 = 45% of the building area. That falls “up to and including 50%” and fits the Level 2 description in the CEBC (Level 2 involves reconfiguration up to and including 50% of the area).
- Choose method: The applicant may elect the Work‑Area Compliance Method (Chapters 6–12) and treat the work as a Level 2 alteration. Under that method the applicable Chapter 8 (Alterations—Level 2) technical requirements will apply.
- Check triggers: Because the work area is less than 50%, the CEBC seismic provisions that are keyed to “work area exceeds 50%” (special anchorage/bracing triggers) do not automatically apply; however, other structural or egress triggers in Chapters 6–12 or Chapter 3 provisions could still apply and must be checked.
- Submission: The permit set should document classification as Level 2, show the Chapter 8 compliance steps taken (structural, egress, fire protection, accessibility, etc.), and include any calculations or evaluations required by those chapters.
If instead the applicant wanted to use the Performance Method, they must first confirm jurisdictional adoption of Chapter 13, then perform the Chapter 13 scoring evaluation and submit the score documentation. § 301.3.3 and Chapter 13 set this pathway out.
Related provisions (quick reference)
- § 301.3.1 — Prescriptive compliance (Chapter 5)
- § 301.3.2 — Work‑area compliance method (Chapters 6–12)
- § 301.3.3 — Performance compliance method (Chapter 13)
- § 1301.1 — Scope and intent of Chapter 13 (performance)
- § 1302.1 — Applicability rules for Chapter 13 evaluations
- § 304.3.2 — Structural evaluation/upgrade reference invoked by work‑area/seismic triggers (see CEBC structural triggers)
- Chapter 5 — Prescriptive Compliance Method (see CEBC Chapter synopses)
Code references
Grounded in the retrieved California Building Code — click a citation to read the verbatim passage:
CBC § 1.10.1 High relevance — show source text
Chapter 5A Prescriptive Compliance Method.
Chapter 5A provides details for the prescriptive compliance method for alteration, addition and change of occupancy of existing build- ings and structures regulated by the Department of Health Care Access and Information/Office of Statewide Hospital Planning and Development, which include hospitals and correctional treatment centers (applications listed in Sections 1.10.1 (OSHPD 1).
Chapter 6 Classification of Work.
Chapter 6 provides an overview of the Work Area Method and defines the different classifications of work including alterations, change of occupancy, additions and historic buildings. Detailed requirements for all of these are given in subsequent Chapters 7 through 11.
Chapter 7 Alterations—Level 1.
Chapter 7 provides the technical requirements for those existing buildings that undergo Level 1 alterations as described in Section 602, which includes replacement or covering of existing materials, elements, equipment or fixtures using new materials for the same purpose. This chapter is distinguished from Chapters 8 and 9 by only involving replacement of building components with new components with no reconfiguration of space.
Chapter 8 Alterations—Level 2.
A Level 2 alteration is an alteration involving space reconfiguration that could be up to and including 50 percent of the area of the building or addition of a new building system. Level 2 alterations also include the extension or addition of any system or equipment. The purpose of Chapter 8 is to provide detailed requirements and provisions to identify the required improvements in the existing building elements, means of egress, fire protection, structural systems, energy efficiency, and other building systems include electrical, mechanical and plumbing when a building is being altered.
Chapter 9 Alterations—Level 3.
Chapter 9 provides the technical requirements for those existing buildings that undergo Level 3 alterations. Level 3 alterations are those involving alterations that cover 50 percent of the aggregate area of the building. Under certain situations, this chapter also intends to improve the safety of certain building features beyond the work area and in other parts of the building where no alteration work might be taking place.
Chapter 10 Change of Occupancy.
The purpose of Chapter 10 is to address existing buildings that are subject to a change of occupancy. This chapter is an assembly of requirements to upgrade safety without having to comply fully as a new building. A change of occupancy classification is considered a change of occupancy, however, it will involve a higher level of regulation since the use of the building has made a more significant change.
2025 CALIFORNIA EXISTING BUILDING CODE xiii
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
Chapter 11 Additions.
Chapter 11 provides the requirements for additions, which are considered new construction. The requirements focus on safely integrating the addition with the existing building. This includes issues such as limiting the overall height and area of the building where the addition is not separated by a fire wall.
Chapter 12 Historic Buildings —Reserved
Chapter 12 is not adopted by the State of California. Historic buildings and structures shall comply with Part 8, Title 24, California Code of Regulations.
Chapter 13 Performance Compliance Methods.
Chapter 13 allows for existing buildings to be evaluated to show that alterations or a change of occupancy, while not meeting new construction requirements, will provide a level of safety to demonstrate compliance. Provisions are based on a numerical scoring system involving 21 safety parameters where, when evaluated, such buildings must meet a minimum overall safety score.
CBC § 301 High relevance — show source text
This code provides three main options for a designer in dealing with alterations of existing buildings. These are laid out in Section 301 of this code:
Option 1: Work for alteration, change of occupancy or addition of all existing buildings shall be done in accordance with the Prescriptive Compliance Method given in Chapter 5. It should be noted that this method originates from the former Chapter 34 of the IBC (2012 and earlier editions).
Option 2: Work for alteration, change of occupancy or addition of all existing buildings shall be done in accordance with the Work Area Compliance Method given in Chapters 6 through 12.
2025 CALIFORNIA EXISTING BUILDING CODE xi
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
Option 3: Work for alteration, change of occupancy or addition of all existing buildings shall be done in accordance with the Performance Compliance Method given in Chapter 13. It should be noted that this option was also provided in the former Chapter 34 of the IBC (2012 and earlier editions).
Under limited circumstances, a building alteration can be made to comply with the laws under which the building was originally built, as long as the accessibility requirements are met, there has been no substantial structural damage and there will be limited structural alteration. Flood hazard provisions also must still be addressed where there is a substantial improvement.
Note that all repairs must comply with Chapter 4 and all relocated buildings are addressed by Chapter 14.
ARRANGEMENT AND FORMAT OF THE 2025 CEBC
The format of the CEBC allows each chapter to be devoted to a particular subject. The following table shows how the CEBC is divided. The subsequent table shows CEBC requirements that are correlated with other California Codes. The chapter synopses detail the scope and intent of the provisions of the CEBC.
CHAPTER TOPICS Col2 CHAPTER SUBJECTS 1, 2 Administrative Requirements and Definitions 3 Provisions for all Compliance Methods 4 Repairs 5 Prescriptive Compliance Method for Existing Buildings 6–11 Work Area Compliance Method for Existing Buildings 13 Performance Compliance Method for Existing Buildings 14 Relocated Buildings 15 Construction Safeguards 16 Referenced Standards Appendix A Guidelines for Seismic Retrofit of Existing Buildings Appendix B Supplementary Accessibility Requirements for Existing Buildings Appendix C Guidelines for Wind Retrofit of Existing Buildings Appendix D Board of Appeals Appendix E Temporary Emergency Uses Resource A Guidelines on Fire Ratings of Archaic Materials and Assemblies CALIFORNIA BUILDING CODE CORRELATED TOPICS
The CEBC requirements for construction safeguards are directly correlated to the requirements of the CBC. The following table shows chapters of the CBC that are correlated with the CEBC:
CEBC/CBC CORRELATED TOPICS Col2 Col3 CEBC CHAPTER/SECTION CBC CHAPTER/SECTION SUBJECT Chapter 15 Chapter 33 Construction safeguards Chapter 1 Scope and Administration.
Chapter 1 establishes the limits of applicability of the code and describes how the code is to be applied and enforced. The provisions of Chapter 1 establish the authority and duties of the code official appointed by the authority having jurisdiction and also establish the rights and privileges of the design professional, contractor and property owner.
Chapter 2 Definitions.
CBC § 301 High relevance — show source text
The IEBC is a model code in the International Code family of codes intended to provide requirements for repair and alternative approaches for alterations, changes of occupancy and additions to existing buildings. A large number of existing buildings and structures do not comply with the current building code requirements for new construction. Although many of these buildings are potentially salvageable, rehabilitation is often cost-prohibitive because compliance with all the requirements for new construction could require extensive changes that go well beyond the value of the building or the original scope of the alteration. At the same time, it is necessary to regulate construction in existing buildings that undergo additions, alterations, extensive repairs or change of occupancy. Such activity represents an opportunity to ensure that new construction complies with the current building codes and that existing conditions are maintained, at a minimum, to their current level of compliance or are improved as required to meet basic safety levels. To accomplish this objective, and to make the alteration process easier, this code allows for options for controlled departure from full compliance with the International Codes dealing with new construction, while maintaining basic levels for fire safety, structural and life safety features of the rehabilitated building.
This code provides three main options for a designer in dealing with alterations of existing buildings. These are laid out in Section 301 of this code:
Option 1: Work for alteration, change of occupancy or addition of all existing buildings shall be done in accordance with the Prescriptive Compliance Method given in Chapter 5. It should be noted that this method originates from the former Chapter 34 of the IBC (2012 and earlier editions).
Option 2: Work for alteration, change of occupancy or addition of all existing buildings shall be done in accordance with the Work Area Compliance Method given in Chapters 6 through 12.
2025 CALIFORNIA EXISTING BUILDING CODE xi
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
Option 3: Work for alteration, change of occupancy or addition of all existing buildings shall be done in accordance with the Performance Compliance Method given in Chapter 13. It should be noted that this option was also provided in the former Chapter 34 of the IBC (2012 and earlier editions).
Under limited circumstances, a building alteration can be made to comply with the laws under which the building was originally built, as long as the accessibility requirements are met, there has been no substantial structural damage and there will be limited structural alteration. Flood hazard provisions also must still be addressed where there is a substantial improvement.
Note that all repairs must comply with Chapter 4 and all relocated buildings are addressed by Chapter 14.
ARRANGEMENT AND FORMAT OF THE 2025 CEBC
The format of the CEBC allows each chapter to be devoted to a particular subject. The following table shows how the CEBC is divided. The subsequent table shows CEBC requirements that are correlated with other California Codes. The chapter synopses detail the scope and intent of the provisions of the CEBC.
CBC § 1.10.1 High relevance — show source text
xii 2025 CALIFORNIA EXISTING BUILDING CODE
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
Chapter 3 Provisions for All Compliance Methods.
Chapter 3 guides the use of the three compliance methods of the CEBC and provides requirements that apply globally. The globally applicable requirement include general requirements related to buildings materials and other applicable codes, storm shelters, structural loads, in-situ load tests, accessibility, smoke alarms, carbon monoxide detection and exterior wall coverings.
Chapter 3A Provisions for All Compliance Methods.
Chapter 3A controls the compliance options for alteration, repair, addition, evaluation and change of occupancy of existing structures regulated by the Department of Health Care Access and Information/Office of Statewide Hospital Planning and Development, which include hospitals and correctional treatment centers (applications listed in Sections 1.10.1 (OSHPD 1).
Chapter 4 Repairs.
Chapter 4, a chapter independent of the three compliance methods, governs the repair of existing buildings. The provisions define conditions under which repairs may be made using materials and methods like those of the original construction or the extent to which repairs must comply with requirements for new buildings.
Chapter 4A Repairs.
Chapter 4A governs the repair of existing buildings regulated by the Department of Health Care Access and Information/Office of State- wide Hospital Planning and Development, which include hospitals and correctional treatment centers (applications listed in Sections 1.10.1 (OSHPD 1).
Chapter 5 Prescriptive Compliance Method.
Chapter 5 provides one of the three main options of compliance available in the CEBC for buildings and structures undergoing alteration, addition or change of occupancy. The base requirements are more administrative in nature. The structural triggers for upgrades are consistent with the Work Area Method.
Chapter 5A Prescriptive Compliance Method.
Chapter 5A provides details for the prescriptive compliance method for alteration, addition and change of occupancy of existing build- ings and structures regulated by the Department of Health Care Access and Information/Office of Statewide Hospital Planning and Development, which include hospitals and correctional treatment centers (applications listed in Sections 1.10.1 (OSHPD 1).
Chapter 6 Classification of Work.
Chapter 6 provides an overview of the Work Area Method and defines the different classifications of work including alterations, change of occupancy, additions and historic buildings. Detailed requirements for all of these are given in subsequent Chapters 7 through 11.
Chapter 7 Alterations—Level 1.
Chapter 7 provides the technical requirements for those existing buildings that undergo Level 1 alterations as described in Section 602, which includes replacement or covering of existing materials, elements, equipment or fixtures using new materials for the same purpose. This chapter is distinguished from Chapters 8 and 9 by only involving replacement of building components with new components with no reconfiguration of space.
Chapter 8 Alterations—Level 2.
A Level 2 alteration is an alteration involving space reconfiguration that could be up to and including 50 percent of the area of the building or addition of a new building system. Level 2 alterations also include the extension or addition of any system or equipment. The purpose of Chapter 8 is to provide detailed requirements and provisions to identify the required improvements in the existing building elements, means of egress, fire protection, structural systems, energy efficiency, and other building systems include electrical, mechanical and plumbing when a building is being altered.
Chapter 9 Alterations—Level 3.
CBC § 1001.3 High relevance — show source text
1001.3 Change of Occupancy Chapter 10, 101.2, 101.3, 101.4, 104.3, 104.3.2, 106.2.6, 110.1, 115.5, 202, 301.1, 301.3, 307.1, 308.1, 501.1, 505.3, 506, 601.1, 605, 702.5, 1301.1, 1302.1, 1302.1.6, 1304.1.1, 1304.1.3, 1305.2.17, 1307.1.1, 1401.2, B101.2, B101.3, B101.4, C101.1, C201.1 Change of Use 202 Classroom Acoustics 502.6, 503.16, 506.6, 903.4, 1011.4, 1101.4 Code Official Chapter 1, 202, 301.3, 302.1, 302.3, 303.2.1, 304.2, 405.2.3.1, 501.2, 506.1, 506.1.1, 802.6, 804.2, 1001.2, 1011.5.1, 1303.1, 1303.1.1, 1304.1.2, 1304.1.3, 1402.7, 1501.6.7, 1509.1, A102.2, A107.1, A108.1, A113.7, A205.3.2, A301.1, A301.2, A301.3, A302.1, A303.1, A304.2.1, A304.2.2, A304.2.3, Table A304.2.3(1), A304.2.3(2), Table A304.2.3(2), A304.5, A403.8, A403.9.3.2, A404.1, A405.3, A405.3.2 Compartmentation 1305.2.3, Table 1305.2.3, 1305.2.20, Table 1305.2.20, Table
1306.1 Compliance Methods Chapter 3 Performance compliance method Chapter 13, 301.3.3 Prescriptive compliance method Chapter 5, 301.3.1 Work area compliance method Chapter 6, Chapter 7, Chapter 8, Chapter 9, Chapter 10, Chapter 11, 301.3.2
CBC § 301.3 High relevance — show source text
202, 301.3, 302.1, 302.3, 303.2.1, 304.2, 405.2.3.1, 501.2, 506.1, 506.1.1, 802.6, 804.2, 1001.2, 1011.5.1, 1303.1, 1303.1.1, 1304.1.2, 1304.1.3, 1402.7, 1501.6.7, 1509.1, A102.2, A107.1, A108.1, A113.7, A205.3.2, A301.1, A301.2, A301.3, A302.1, A303.1, A304.2.1, A304.2.2, A304.2.3, Table A304.2.3(1), A304.2.3(2), Table A304.2.3(2), A304.5, A403.8, A403.9.3.2, A404.1, A405.3, A405.3.2 Compartmentation 1305.2.3, Table 1305.2.3, 1305.2.20, Table 1305.2.20, Table
1306.1 Compliance Methods Chapter 3 Performance compliance method Chapter 13, 301.3.3 Prescriptive compliance method Chapter 5, 301.3.1 Work area compliance method Chapter 6, Chapter 7, Chapter 8, Chapter 9, Chapter 10, Chapter 11, 301.3.2
Conflict 102.1, 102.4.1, 102.4.2, 104.2.4.1, 113.1, 302.2, 1302.1.2 Construction Documents 104.3, 105.3, 105.3.1, 105.4, 106, 113.4, 202, 601.2, A105.4, A205.3, A301.1, A406, A407.1 Construction Safeguards 101.5, Chapter 15 Accessibility 1511 Adjoining property 1505 Automatic sprinklers 1510 Fire extinguishers 1507 Means of egress 1508 Owner’s responsibilities 1502 Protection of pedestrians 1504 Sanitary 1503 Standpipes 1509 Water supply 1512 Corridor
Dead-end 801.4, 804.8, 1011.5.1, 1305.2.12, 1305.2.12.1, Table 1306.1 Doors 804.7.1, 1011.5.1 Exit access 801.4, 802.2.1, 802.4, 802.4.1, 901.2, 1011.8.2 Openings 804.7, 804.7.1, 804.7.2, 804.7.3, 804.7.3.1, 804.7.4, 1011.5.1,
1011.8.2
CRC § 301 High relevance — show source text
This change expands the current process from two independent 1-year cycles to a single continuous 3year cycle. There will be two groups of code development committees and they will meet in separate years. The current groups will be reworked. With the energy provisions of the International Energy Conservation Code ® (IECC®) and Chapter 11 of the International Residential Code ® (IRC®) now moved to the Code Council’s Standards Development Process, the reduced volume of code changes will be distributed between Groups A and B.
Code change proposals submitted for code sections that have a letter designation in front of them will be heard by the respective committee responsible for such code sections. Because different committees hold Committee Action Hearings in different years, proposals for most codes will be heard by committees in both the 2024 (Group A) and the 2025 (Group B) code development cycles. It is very important that anyone submitting code change proposals understands which code development committee is responsible for the section of the code that is the subject of the code change proposal.
Please visit the ICC website at iccsafe.org/products-and-services/i-codes/code-development/current-code-development-cycle for further information on the Code Development Committee responsibilities as it becomes available.
Coordination of the I-Codes
The coordination of technical provisions allows the I-Codes to be used as a complete set of complementary documents. Individual codes can also be used in subsets or as stand-alone documents. Some technical provisions that are relevant to more than one subject area are duplicated in multiple model codes.
INTRODUCTION TO THE INTERNATIONAL EXISTING BUILDING CODE
The IEBC establishes minimum requirements for existing buildings using prescriptive and performance-related provisions. It is founded on broad-based principles intended to encourage the use and reuse of existing buildings while requiring reasonable upgrades and improvements.
The IEBC is a model code in the International Code family of codes intended to provide requirements for repair and alternative approaches for alterations, changes of occupancy and additions to existing buildings. A large number of existing buildings and structures do not comply with the current building code requirements for new construction. Although many of these buildings are potentially salvageable, rehabilitation is often cost-prohibitive because compliance with all the requirements for new construction could require extensive changes that go well beyond the value of the building or the original scope of the alteration. At the same time, it is necessary to regulate construction in existing buildings that undergo additions, alterations, extensive repairs or change of occupancy. Such activity represents an opportunity to ensure that new construction complies with the current building codes and that existing conditions are maintained, at a minimum, to their current level of compliance or are improved as required to meet basic safety levels. To accomplish this objective, and to make the alteration process easier, this code allows for options for controlled departure from full compliance with the International Codes dealing with new construction, while maintaining basic levels for fire safety, structural and life safety features of the rehabilitated building.
This code provides three main options for a designer in dealing with alterations of existing buildings. These are laid out in Section 301 of this code:
Option 1: Work for alteration, change of occupancy or addition of all existing buildings shall be done in accordance with the Prescriptive Compliance Method given in Chapter 5. It should be noted that this method originates from the former Chapter 34 of the IBC (2012 and earlier editions).
Option 2: Work for alteration, change of occupancy or addition of all existing buildings shall be done in accordance with the Work Area C
CBC § 3-3 High relevance — show source text
2025 CALIFORNIA EXISTING BUILDING CODE 3-3
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
PROVISIONS FOR ALL COMPLIANCE METHODS
members added as part of the alteration shall comply with the California Building Code . This exception shall not apply to the following:
Alterations for accessibility required by the California Building Code, Chapter 11A.
Alterations that constitute substantial improvement in flood hazard areas, which shall comply with Sections 503.2, 701.3 or 1303.1.3.
Structural provisions of Section 304, Chapter 5 or to the structural provisions of Sections 706, 805 and 906.
301.3.1 Prescriptive compliance. Alterations, additions and changes of occupancy complying with Chapter 5 of this code in buildings complying with the California Fire Code shall be considered in compliance with the provisions of this code.
Exception: Hospital buildings removed from acute care service, skilled nursing facilities, intermediate-care facilities, correctional treatment centers and acute psychiatric hospitals [OSHPD 1R, 2, 4 and 5]. The provisions of adopted sections in Chapters 3 through 5 shall control the alteration, repair and change of occupancy or function of existing structures for applications listed in Section 1.10.1, 1.10.2, 1.10.4 and 1.10.5 regulated by the Department of Health Care Access and Information/Office of Statewide Hospital Planning and Development (OSHPD). Refer to Chapter 3A for services, systems and utilities that serve OSHPD 1 buildings.
301.3.2 Work area compliance method. A lterations, additions and changes of occupancy complying with the applicable requirements of Chapters 6 through 12 of this code shall be considered in compliance with the provisions of this code.
301.3.3 Performance compliance method. Alterations, additions and changes of occupancy complying with Chapter 13 of this code shall be considered in compliance with the provisions of this code.
Note: [HCD 1 & HCD 2] The provisions contained in Chapter 13 are not adopted by HCD, but may be available for adoption by a local ordinance. (See Section 1.1.11.)
301.4 Relocated or moved buildings. Relocated or moved buildings shall comply with the requirements of Chapter 14.
SECTION 302—GENERAL PROVISIONS
302.1 Dangerous conditions. The code official shall have the authority to require the elimination of conditions deemed dangerous.
302.1.1 Dangerous conditions. [BSC] Regardless of the extent of structural or nonstructural damage, the code official shall have the authority to require the elimination of conditions deemed dangerous.
302.2 Additional codes. Alterations, repairs, additions and changes of occupancy to, or relocation of, existing buildings and structures shall comply with the provisions for alterations, repairs, additions and changes of occupancy or relocation, respectively, in this code and the California Energy Code, California Fire Code, California Mechanical Code, California Plumbing Code, California Residential Code and California Electrical Code . Where provisions of the other codes conflict with provisions of this code, the provisions of this code shall take precedence.
CBC § 1.10.1 High relevance — show source text
CHAPTER TOPICS Col2 CHAPTER SUBJECTS 1, 2 Administrative Requirements and Definitions 3 Provisions for all Compliance Methods 4 Repairs 5 Prescriptive Compliance Method for Existing Buildings 6–11 Work Area Compliance Method for Existing Buildings 13 Performance Compliance Method for Existing Buildings 14 Relocated Buildings 15 Construction Safeguards 16 Referenced Standards Appendix A Guidelines for Seismic Retrofit of Existing Buildings Appendix B Supplementary Accessibility Requirements for Existing Buildings Appendix C Guidelines for Wind Retrofit of Existing Buildings Appendix D Board of Appeals Appendix E Temporary Emergency Uses Resource A Guidelines on Fire Ratings of Archaic Materials and Assemblies CALIFORNIA BUILDING CODE CORRELATED TOPICS
The CEBC requirements for construction safeguards are directly correlated to the requirements of the CBC. The following table shows chapters of the CBC that are correlated with the CEBC:
CEBC/CBC CORRELATED TOPICS Col2 Col3 CEBC CHAPTER/SECTION CBC CHAPTER/SECTION SUBJECT Chapter 15 Chapter 33 Construction safeguards Chapter 1 Scope and Administration.
Chapter 1 establishes the limits of applicability of the code and describes how the code is to be applied and enforced. The provisions of Chapter 1 establish the authority and duties of the code official appointed by the authority having jurisdiction and also establish the rights and privileges of the design professional, contractor and property owner.
Chapter 2 Definitions.
Chapter 2 is the repository of the definitions of terms used in the body of the code. The user of the code should be familiar with and consult this chapter because the definitions are essential to the correct interpretation of the code and because the user may not be aware that a term is defined.
xii 2025 CALIFORNIA EXISTING BUILDING CODE
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
Chapter 3 Provisions for All Compliance Methods.
Chapter 3 guides the use of the three compliance methods of the CEBC and provides requirements that apply globally. The globally applicable requirement include general requirements related to buildings materials and other applicable codes, storm shelters, structural loads, in-situ load tests, accessibility, smoke alarms, carbon monoxide detection and exterior wall coverings.
Chapter 3A Provisions for All Compliance Methods.
Chapter 3A controls the compliance options for alteration, repair, addition, evaluation and change of occupancy of existing structures regulated by the Department of Health Care Access and Information/Office of Statewide Hospital Planning and Development, which include hospitals and correctional treatment centers (applications listed in Sections 1.10.1 (OSHPD 1).
Chapter 4 Repairs.
Chapter 4, a chapter independent of the three compliance methods, governs the repair of existing buildings. The provisions define conditions under which repairs may be made using materials and methods like those of the original construction or the extent to which repairs must comply with requirements for new buildings.
Chapter 4A Repairs.
Chapter 4A governs the repair of existing buildings regulated by the Department of Health Care Access and Information/Office of State- wide Hospital Planning and Development, which include hospitals and correctional treatment centers (applications listed in Sections 1.10.1 (OSHPD 1).
CBC § 150.1 High relevance — show source text
2025 CALIFORNIA ENERGY CODE 175
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
176 2025 CALIFORNIA ENERGY CODE
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
8 SINGLE-FAMILY RESIDENTIAL BUILDINGS—PERFORMANCE
AND PRESCRIPTIVE COMPLIANCE APPROACHES
SECTION 150.1—PERFORMANCE AND PRESCRIPTIVE COMPLIANCE APPROACHES FOR SINGLE-FAMILY RESIDENTIAL BUILDINGS
(a) Basic requirements. Single-family residential buildings shall meet all of the following:
- The applicable requirements of Sections 110.0 through 110.10.
- The applicable requirements of Section 150.0 (mandatory features).
- Either the performance standards or the prescriptive standards set forth in this section for the climate zone in which the building is located. Climate zones are shown in Reference Joint Appendix JA2–Weather/Climate Data. Exception to Section 150.1(a)3: If a single contiguous subdivision or tract falls in more than one climate zone, all buildings in the subdivision or tract may be designed to meet the performance or prescriptive standards for the climate zone that contains 50 percent or more of the dwelling units. Note: The Commission periodically updates, publishes, and makes available to interested persons and local enforcement agencies precise descriptions of the climate zones, as specified in Reference Joint Appendix JA2–Weather/Climate Data.
Note: The requirements of Sections 150.0(a) through 150.0(r) apply to newly constructed buildings and Sections 150.2(a) and 150.2(b) specifies changes to the requirements of Sections 150.1(a) through 150.1(c) that apply to additions or alterations.
(b) Performance approach. A building complies with the performance approach if the energy consumption calculated for the proposed design building is no greater than the energy budget calculated for the standard design building using Commission-certified compliance software as specified by Sections 10-109(c) and 10-116.
- Energy budget. The energy budget is expressed in terms of source energy and long-term system cost (LSC). A. Long-term system cost (LSC). The LSC energy budget is determined by applying the mandatory and prescriptive requirements of the standard design to the proposed design building and has two components, the Efficiency LSC and the Total LSC.
i. The Efficiency LSC energy is the sum of the LSC energy for space-conditioning, water heating, mechanical ventilation, and the self-utilization credit.
ii. The Total LSC energy is the sum of the Efficiency LSC energy and LSC energy from the photovoltaic system, battery energy storage systems (BESS), lighting, demand flexibility, and other plug loads. B. Source energy. The source energy budget is determined by applying the mandatory and prescriptive requirements of the standard design to the proposed design building. The source energy is the total annual source energy. Exception to Section 150.1(b)1. A community shared solar electric generation system, or other renewable electric generation system, or community shared BESS, which provides dedicated power, utility energy reduction credits, or payments for energy bill reductions to the permitted building and is approved by the Energy Commission as specified in Title 24, Part 1, Section 10-115, may offset part or all of the solar electric generation system and demand flexibility Energy Design Rating required to comply with the Standards, as calculated according to methods established by the Commission in the Residential ACM Reference Manual.
CBC § 130.5 High relevance — show source text
Exception 2 to Section 130.5(d): Receptacles in healthcare facilities.
(e) Demand responsive controls and equipment. See Section 110.12 for requirements for demand responsive controls and equipment, including demand responsive controls for controlled receptacles.
Note: Definitions of terms and phrases in Section 130.5 are determined as specified in Section 100.1(b). Terms and phrases not found in Section 100.1(b) shall be defined as specified in Title 24, Part 3, Article 100 of the California Electrical Code.
Note: Authority: Sections 25213, 25218, 25218.5, 25402 and 25402.1, Public Resources Code. Reference: Sections 25007, 25008, 25218.5, 25310, 25402, 25402.1, 25402.4, 25402.5, 25402.8, and 25943, Public Resources Code.
2025 CALIFORNIA ENERGY CODE 103
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
104 2025 CALIFORNIA ENERGY CODE
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
5 NONRESIDENTIAL AND HOTEL/MOTEL OCCUPANCIES—
PERFORMANCE AND PRESCRIPTIVE COMPLIANCE APPROACHES FOR ACHIEVING ENERGY EFFICIENCY
SECTION 140.0—PERFORMANCE AND PRESCRIPTIVE COMPLIANCE APPROACHES
Nonresidential and hotel/motel buildings shall comply with all of the following: (a) The requirements of Sections 100.0 through 110.12 applicable to the building project (mandatory measures for all buildings). (b) The requirements of Sections 120.0 through 130.5 (mandatory measures for nonresidential and hotel/motel buildings). (c) Either the performance compliance approach (energy budgets) specified in Section 140.1 or the prescriptive compliance approach specified in Section 140.2 for the climate zone in which the building will be located. Climate zones are shown in Figure 100.1-A.
Note to Section 140.0(c): The Commission periodically updates, publishes and makes available to interested persons and local enforcement agencies precise descriptions of the climate zones, which is available by zip code boundaries depicted in the Reference Joint Appendices along with a list of the communities in each zone.
Note to Section 140.0: The requirements of Sections 140.1 through 140.10 apply to newly constructed buildings. Section 141.0 specifies which requirements of Sections 140.1 through 140.10 also apply to additions or alterations to existing buildings.
Note: Authority: Sections 25213, 25218, 25218.5, 25402 and 25402.1, Public Resources Code. Reference: Sections 25007, 25008, 25218.5, 25310, 25402, 25402.1, 25402.4, 25402.5, 25402.8, and 25943, Public Resources Code.
SECTION 140.1—PERFORMANCE APPROACH: ENERGY BUDGETS
A building complies with the performance standards if the energy consumption calculated for the proposed design building is no greater than the energy budget calculated for the standard design building using Commission-certified compliance software as specified by Sections 10-109(c) and 10-116.
CBC § 1.11. High relevance — show source text
The state agency does not adopt sections identified with the following symbol: The Office of the State Fire Marshal’s adoption of this chapter or individual sections is applicable to structures regulated by other state agencies pursuant to Section 1.11.
2025 CALIFORNIA EXISTING BUILDING CODE 13-1
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
13-2 2025 CALIFORNIA EXISTING BUILDING CODE
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
13 PERFORMANCE COMPLIANCE METHODS
Not adopted by the State of California (May be available for adoption by local ordinance. See Section 1.1.11.) (See Section 104.11 for consideration of alternative means of compliance.)
User notes:
About this chapter: Chapter 13 allows for existing buildings to be evaluated so as to show that alterations, while not meeting new construction requirements, will improve the current existing situation. Provisions are based on a numerical scoring system involving 21 various safety parameters and the degree of code compliance for each issue.
SECTION 1301—GENERAL
1301.1 Scope. The provisions of this chapter shall apply to the alteration, addition and change of occupancy of existing structures, including historic structures, as referenced in Section 301.3.3. The provisions of this chapter are intended to maintain or increase the current degree of public safety, health and general welfare in existing buildings while permitting, alteration, addition and change of occupancy without requiring full compliance with Chapters 6 through 12, except where compliance with the prescriptive method of Chapter 5 or the work area method of other provisions of this code is specifically required in this chapter.
1301.1.1 Compliance with other methods. Alterations, additions and changes of occupancy to existing structures shall comply with the provisions of this chapter or with one of the methods provided in Section 301.3.
SECTION 1302—APPLICABILITY
1302.1 General. Existing buildings in which there is work involving additions, alterations or changes of occupancy shall be made to conform to the requirements of this chapter or the provisions of Chapters 6 through 12. The provisions of Sections 1302.1.1 through 1302.1.6 shall apply to existing occupancies that will continue to be, or are proposed to be, in Groups A, B, E, F, I-2, M, R and S. These provisions shall also apply to Group U occupancies where such occupancies are undergoing a change of occupancy or a partial change in occupancy with separations in accordance with Section 1302.1.2. These provisions shall not apply to buildings with occupancies in Group H, I-1, I-3 or I-4.
1302.1.1 Change in occupancy. Where an existing building is changed to a new occupancy classification and this section is applicable, the provisions of this section for the new occupancy shall be used to determine compliance with this code.
1302.1.2 Partial change in occupancy. Where a portion of the building is changed to a new occupancy classification and that portion is separated from the remainder of the building with fire barrier or horizontal assemblies having a fire-resistance rating as required by Table 508.4 of the International Building Code or Section R302 of the International Residential Code for the separate occupancies, or with approved compliance alternatives, the portion changed shall be made to conform to the provisions of this section. Only the portion separated shall be required to be evaluated for compliance.
Frequently asked questions
Can I mix the prescriptive and performance methods to pick the easiest parts of each?
No. The CEBC requires selection of a single compliance method (prescriptive, work‑area, or performance); the three methods are not to be combined except where the enforcement agency specifically allows it.
Is Chapter 13 available statewide in California?
Not necessarily. The CEBC text states Chapter 13 (performance) is “not adopted by the State of California” and may be available only by local ordinance—confirm adoption with your local AHJ.
If my alteration is exactly 50% of the building area which method applies?
A work area equal to 50% falls within the Level 2 definition (reconfiguration up to and including 50%); use the Work‑Area Method Chapters appropriate to Level 2 unless you elect the prescriptive or (if available) performance method.
Do structural upgrades ever depend on the percent of work area?
Yes. Several seismic and structural triggers in the CEBC are keyed to the work area exceeding 50% of the building area; when that threshold is exceeded, additional evaluations or anchor/brace work can be required.
What should I check first with the AHJ before selecting a method?
Verify (1) whether Chapter 13 is adopted locally; (2) whether your building is regulated by a state agency with different rules (OSHPD, DSA, HCD); and (3) whether the enforcement agency will permit any exceptions or combination approaches.
More in California Building Code
- Administration & Permits
- Energy Efficiency
- Existing Buildings
- Occupancy Classification & Use
- Hazardous Materials & Occupancies
- Types of Construction
- Fire-Resistance & Fire Safety
- Interior Finishes
- Means of Egress
- Accessibility
- Exterior Walls
- Roofing & Roof Assemblies
- Structural Design
- Special Inspections & Tests
- Foundations & Soils
- Concrete
- Masonry
- Steel
- Wood
- Elevators & Conveying Systems
Ask about the CBC
Get cited, plain-English answers on the California Building Code for your project — any code section, any scenario.
Start Free Trial