Section 4. General Rules for Filing Forms W-2 (Copy A) Electronically

.01 Employers must file Forms W-2 (Copy A) with the SSA electronically if they file 250 or more calendar year 2008 Forms W-2 (Copy A) during a calendar year unless the IRS granted a waiver. For details, get the 2008 Instructions for Forms W-2 and W-3. The SSA publication EFW2, Specifications for Filing Forms W-2 Electronically, contains specifications and procedures for electronic filing of Form W-2 information with the SSA. Employers are cautioned to obtain the most recent revision of EFW2 (and supplements) due to any subsequent changes in specifications and procedures.

.02 You may obtain a copy of the EFW2 by:

www.socialsecurity.gov/employer/pub.htm ,

Social Security Administration OCO, DES; Attn: Employer Reporting Services Center 300 North Greene Street Baltimore MD 21290-0300

www.socialsecurity.gov/employer/empcontacts.htm ), or

.03 Electronic filers do not file a paper Form W-3. See the SSA publication EFW2 for guidance on transmitting Form W-2 (Copy A) information to SSA electronically.

.04 Employers with fewer than 250 Forms W-2 are encouraged to electronically file Forms W-2 (Copy A) with the SSA. Doing so will enhance the timeliness and accuracy of forms processing.

.05 Employers who do not comply with the electronic filing requirements for Form W-2 (Copy A) and who are not granted a waiver by the IRS may be subject to penalties. Employers who file Form W-2 information with the SSA electronically must not send the same data to the SSA on paper Forms W-2 (Copy A). Any duplicate reporting may subject filers to unnecessary contacts by the SSA or the IRS.

Part B. Specifications for Substitute Forms W-2 and W-3

Section 1A. Specifications for Red-Ink Substitute Form W-2 (Copy A) and Form W-3 Filed with the SSA

.01 The official IRS-printed red dropout ink Form W-2 (Copy A) and W-3 and their exact substitutes are referred to as red-ink in this revenue procedure. Employers may file substitute Forms W-2 (Copy A) and W-3 with the SSA. The substitute forms must be exact replicas of the official IRS forms with respect to layout and content because they will be read by scanner equipment.

2008–28 I.R.B. 96 July 14, 2008

.02 Paper used for cutsheets and continuous-pinfed forms for substitute Form W-2 (Copy A) and Form W-3 that are to be filed with the SSA must be white 100% bleached chemical wood, 18-20 pound paper only, optical character recognition (OCR) bond produced in accordance with the following specifications:

• Acidity: Ph value, average, not less than. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5

• Basis weight: 17 x 22 inch 500 cut sheets, pound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-20

• Metric equivalent—gm./sq. meter

(a tolerance of +5 pct. is allowed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68-75

• Stiffness: Average, each direction, not less than—milligrams

Cross direction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Machine direction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

• Tearing strength: Average, each direction, not less than—grams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

• Opacity: Average, not less than—percent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

• Reflectivity: Average, not less than—percent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

• Thickness: Average—inch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.0038

Metric equivalent—mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.097

(a tolerance of +0.0005 inch (0.0127 mm) is allowed) Paper cannot vary more than 0.0004 inch (0.0102 mm) from one edge to the other.

• Porosity: Average, not less than—seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

• Finish (smoothness): Average, each side—seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-55

(for information only) the Sheffield equivalent—units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170-d200

• Dirt: Average, each side, not to exceed—parts per million . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Note. Reclaimed fiber in any percentage is permitted, provided the requirements of this standard are met.

.03 All printing of substitute Forms W-2 (Copy A) and W-3 must be in Flint red OCR dropout ink except as specified below. The following must be printed in nonreflective black ink:

.04 The vertical and horizontal spacing for all federal payment and data boxes on Forms W-2 and W-3 must meet specifications. On Form W-3 and Form W-2 (Copy A), all the perimeter rules must be 1-point (0.014-inch), while all other rules must be one-half point (0.007-inch). Vertical rules must be parallel to the left edge of the form; horizontal rules parallel to the top edge.

.05 The official red-ink Form W-3 and Form W-2 (Copy A) are 7.5 inches wide. Employers filing Forms W-2 (Copy A) with the SSA on paper must also file a Form W-3. Form W-3 must be the same width (7.5 inches) as the Form W-2. One Form W-3 is printed on a standard-size, 8.5 x 11-inch page. Two official Forms W-2 (Copy A) are contained on a single 8.5 x 11-inch page (exclusive of any snap-stubs).

.06 The top, left, and right margins for the Form W-2 (Copy A) and Form W-3 are .5 inches ( ¹ /2 inch). All margins must be free of printing except for the words “DO NOT STAPLE” on red-ink Form W-3. The space between the two Forms W-2 (Copy A) is 1.33 inches.

.07 The identifying numbers are “22222” for Form W-2 (Copies A (and 1)) and “33333” for Form W-3. No printing should appear anywhere near the identifying numbers.

Note. The identifying number must be printed in nonreflective black ink in OCR-A font of 10 characters per inch.

July 14, 2008 97 2008–28 I.R.B.

.08 The depth of the individual scannable image on a page must be the same as that on the official IRS forms. The depth from the top line to the bottom line of an individual Form W-2 (Copy A) must be 4.17 inches and the depth from the top line to the bottom line of Form W-3 must be 4.67 inches. (See Exhibits A and B.)

.09 Continuous-pinfed Forms W-2 (Copy A) must be separated into 11-inch deep pages. The pinfed strips must be removed when Forms W-2 (Copy A) are filed with the SSA. The two Forms W-2 (Copy A) on the 11-inch page must not be separated (only the pages are to be separated (burst)). The words “Do Not Cut, Fold, or Staple Forms on This Page” must be printed twice between the two Forms W-2 (Copy A) in Flint red OCR dropout ink. Perforations are required on all other copies (Copies 1, B, C, 2, and D) to enable the separation of individual forms.

.10 Box 12 of Form W-2 (Copy A) contains four entry boxes – 12a, 12b, 12c, and 12d. Do not make more than one entry per box. Enter your first code in box 12a (for example, enter Code D in box 12a, not 12d, if it is your first entry). If more than four items need to be reported in box 12, use a second Form W-2 to report the additional items (see “Multiple forms” in the 2008 Instructions for Forms W-2 and W-3). Do not report the same federal tax data to the SSA on more than one Form W-2 (Copy A). However, repeat the identifying information (employee’s name, address, and SSN; employer’s name, address, and EIN) on each additional form.

.11 The checkboxes in box 13 of Form W-2 (Copy A) must be .14 inches each; the space before the first checkbox is .20 inches; the spacing on each remaining side of the 3 checkboxes is .36 inches (see Exhibit A). The checkboxes in box b of Form W-3 must also be .14 inches (see Exhibit B for other dimensions in box b).

Note. More than 50% of an applicable checkbox must be covered by an “X.”

.12 All substitute Forms W-2 (Copy A) and W-3 in the red-ink format must have the tax year, form number, and form title printed on the bottom face of each form using type identical to that of the official IRS form. The red-ink substitute Form W-2 (Copy A) and Form W-3 must have the form producer’s EIN entered directly to the left of “Department of the Treasury,” in red.

.13 The words “For Privacy Act and Paperwork Reduction Act Notice, see back of Copy D.” must be printed in Flint red OCR dropout ink in the same location as on the official Form W-2 (Copy A). The words “For Privacy Act and Paperwork Reduction Act Notice, see back of Copy D of Form W-2.” must be printed at the bottom of the page of Form W-3 in black ink.

.14 The Office of Management and Budget (OMB) Number must be printed on substitute Forms W-3 and W-2 (on each ply) in the same location as on the official IRS forms.

.15 All substitute Forms W-3 must include the instructions that are printed on the same sheet below the official IRS form. .16 The back of substitute Form W-2 (Copy A) and Form W-3 must be free of all printing. .17 All copies must be clearly legible. Fading must be minimized to assure legibility. .18 Chemical transfer paper is permitted for Form W-2 (Copy A) only if the following standards are met:

.19 The Government Printing Office (GPO) symbol and the Catalog Number (Cat. No.) must be deleted from substitute Form W-2 (Copy A) and Form W-3.

Section 1B. Specifications for Laser-Printed Substitute Form W-2 (Copy A) and Form W-3 Filed with the SSA

.01 The SSA-approved, laser-printed, black-and-white Forms W-2 (Copy A) and W-3 are referred to as laser-printed. Specifications for the laser-printed (black-and-white) Forms W-2 (Copy A) and W-3 are similar to the red-ink forms (Part B, Section 1A) except for the items that follow (see Exhibits E and F). Exhibits are samples only and must not be downloaded to meet tax obligations.

(1) Forms must be printed on 8.5 x 11-inch single-sheet paper only, not on continuous-feed using a laser printer. There must be two Forms W-2 (Copy A) printed on a page. There must be no horizontal perforations between the two Forms W-2 (Copy A) on each page.

(2) All forms and data must be printed in nonreflective black ink only.

(3) The data and forms must be programmed to print simultaneously. Forms cannot be produced separately from wage data entries.

(4) The forms must not contain corner register marks.

(5) The forms must not contain any shaded areas including those boxes that are entirely shaded on the red-ink forms.

2008–28 I.R.B. 98 July 14, 2008

(6) Identifying numbers on both Form W-2 (“22222”) and Form W-3 (“33333”) must be preprinted in 14-point Arial bold font or a close approximation.

(7) The form numbers (“W-2” and “W-3”) must be in 18-point Arial font or a close approximation. The tax year (“2008”) on Forms W-2 (Copy A) and W-3 must be in 20-point Arial font or a close approximation.

(8) No part of the box titles or the data printed on the forms may touch any of the vertical or horizontal lines, nor should any of the data intermingle with the box titles. The data should be centered in the boxes.

(9) Do not print any information in the margins of the laser-printed forms (for example, do not print “DO NOT STAPLE” in the top margin of Form W-3).

(10) The word “Code” must not appear in box 12 on Form W-2 (Copy A).

(11) A 4-digit vendor code preceded by four zeros and a slash (for example, 0000/1234) must appear in 12-point Arial font, or a close approximation, under the tax year in place of the Cat. No. on Form W-2 (Copy A) and in the bottom right corner of the “For Official Use Only” box at the bottom of Form W-3. Do not display the form producer’s EIN to the left of “Department of the Treasury.” The vendor code will be used to identify the form producer.

(12) Do not print Catalog Numbers (Cat. No.) on either Form W-2 (Copy A) or Form W-3.

(13) Do not print the checkboxes in:

(14) Do not print dollar signs. If there are no money amounts being reported, the entire field should be left blank.

(15) The space between the two Forms W-2 (Copy A) is 1.33 inches. .02 You must submit samples of your laser-printed substitute forms to the SSA. Only laser-printed, black-and-white substitute Forms W-2 (Copy A) and W-3 for tax year 2008 will be accepted for approval by the SSA. Questions regarding other forms (that is, red-ink Forms W-2c, W-3c, 1099 series, 1096, etc.) must be directed to the IRS.

.03 You will be required to send one set of blank and one set of dummy-data, laser-printed substitute Forms W-2 (Copy A) and W-3 for approval. Sample data entries should be filled in to the maximum length for each box entry, preferably using numeric data or alpha data, depending upon the type required to be entered. Include in your submission the name, telephone number, fax number, and email address of a contact person who can answer questions regarding your sample forms.

.04 To receive approval, you may first contact the SSA at laser.forms@ssa.gov to obtain a template and further instructions in PDF or Excel format. You may also send your 2008 sample, laser-printed substitute forms to:

Social Security Administration Data Operations Center Attn: Laser Forms Approval, Room 235 1150 E. Mountain Drive Wilkes-Barre PA 18702-7997

Send your sample forms via private mail carrier or certified mail in order to verify their receipt. You can expect approval (or disapproval) by the SSA within 30 days of receipt of your sample forms.

.05 The 4-digit vendor code preceded by four zeros and a slash (0000/) must be preprinted on the sample, laser-printed substitute forms. Forms not containing a vendor code will be rejected and will not be submitted for testing or approval. If you do not have a vendor code, you may contact the National Association of Computerized Tax Processors via email at president@nactp.org for information on these codes.

.06 If you use forms produced by a vendor and have questions concerning approval, do not send the forms to the SSA for approval. Instead, you may contact the software vendor to obtain a copy of SSA’s dated approval notice supplied to that vendor.

July 14, 2008 99 2008–28 I.R.B.