Section 1. Additional — Internal Revenue Bulletin 2007-27

.01 If electronic media is not used for filing with the SSA, the substitute copies of Forms W-2 (either red-ink or laser-printed) should be assembled in the same order as the official IRS Forms W-2. Copy A should be first, followed sequentially by perforated sets (Copies 1, B, C, 2, and D).

.02 The substitute form to be filed by the employer with the SSA must carry the designation “Copy A.”

Note. Electronic filers do not submit either red-ink or laser-printed paper Form W-2 (Copy A) or Form W-3 to the SSA.

.03 Substitute forms (red-ink or laser-printed) do not require a copy to be retained by employers (Copy D of Form W-2). However, employers must be prepared to verify or duplicate the information if it is requested by the IRS or the SSA. Paper filers who do not keep a Form W-2 (Copy D) should be able to generate a facsimile of Form W-2 (Copy A) in case of loss.

.04 Except for copies in the official assembly, no additional copies that may be prepared by employers should be placed ahead of Form W-2 (Copy C) “For EMPLOYEE’S RECORDS.”

.05 You must provide instructions similar to those contained on the back of Copies B, C, and 2 of the official IRS Form W-2 to each employee. You may print them on the back of the substitute Copies B, C, and 2 or provide them to employees on a separate statement. You do not need to use the back of Copy 2. If you do not use Copy 2, you may include all the information, which is on the back of the official Copies B, C, and 2, on the back of your substitute Copies B and C only. As an example, you may use the “Note” on the back of the official Copy C as the dividing point between the text for your substitute Copies B and C. Do not print these instructions on the back of Copy 1. Any Forms W-2 (Copy A) and W-3 that are filed with the SSA must have no printing on the reverse side.

2007–27 I.R.B. 35 July 2, 2007