• Carbon-coated forms are not permitted. • Chemically transferred images must be black.

All copies must be clearly legible. Hot wax and cold carbon spots are not permitted for Copy A. Interleaved carbon should be black and must be of good quality to assure legibility on all copies and to avoid smudging. Fading must be minimized to assure legibility.

2.1.4 Printing All print on Copy A of Forms 1098, 1099, 5498, and the print on Form 1096 above the statement, “Return this entire page to the Internal Revenue Service. Photocopies are not acceptable.” must be in Flint J–6983 red OCR dropout ink or an exact match. However, the four-digit form identifying number must be in nonreflective carbon-based black ink in OCR A font.

The shaded areas of any substitute form should generally correspond to the format of the official form.

2005–44 I.R.B. 870 October 31, 2005

The printing for the Form 1096 statement and the following text may be in any shade or tone of black ink. Black ink should only appear on the lower part of the reverse side of Form 1096, where it will not bleed through and interfere with scanning.

Note. The instructions on the front and back of Form 1096, which include filing addresses, must be printed.

Separation between fields must be 0.1 inch.

Except for Form 1099-R and 1099-MISC, the numbered captions are printed as solid with no shaded background.

Other printing requirements are discussed below.

2.1.5 OCR Specifications The contractor must initiate or have a quality control program to assure OCR ink density. Readings will be made when printed on approved 20 lb. white OCR bond with a reflectance of not less than 80%. Black ink must not have a reflectance greater than 15%. These readings are based on requirements of the “Scan-Optics Series 9000” Optical Scanner using Flint J–6983 red OCR dropout ink or an exact match.

The following testers and ranges are acceptable: