Article 5 — Signs in M Zones — Yorba Linda Zoning Code

§ 18.24.230. Permitted. ¶

Except as prescribed in Article 2 of this chapter, only the signs set out in Section 18.26.240 through 18.26.250 shall be permitted in any M zone. (Ord. 2017-1041; Ord. 2019-1056 § 3)

§ 18.24.240. Industrial uses in M-1 zone. ¶

A. For each use, one single-faced, lighted wall or canopy sign, not exceeding one square foot of area for each lineal foot of building or portion thereof, may be placed on the side of the building facing the major street frontage up to a maximum of 100 square feet.
B. For each use, one lighted, freestanding sign not exceeding 30 square feet in area shall be permitted, provided, however, that there be no more than one such sign per lot or parcel of land. Where more than one use is being conducted on a single lot or parcel of land, the permitted sign

area for each use shall be combined into one freestanding sign up to a maximum of 100 square feet. Freestanding signs shall not exceed eight feet in height.

(Ord. 2017-1041; Ord. 2019-1056 § 3)

§ 18.24.250. Public and semipublic uses in M zones. ¶

One lighted sign not exceeding 30 square feet in area shall be permitted. Freestanding signs shall not exceed six feet in height.

(Ord. 2017-1041; Ord. 2019-1056 § 3)