3.52 Flat Areas (0-15% Cross Slope)

Type of Street, and Adjacent Land Use	Cross Section for Lot Size below 10,000 sq. ft.	Curb, Gutter and Side- walk Requirements
_____

Local residential		Integral curb, gutter and sidewalk required

Local commercial industrial		Integral curb, gutter and sidewalk required

Secondary residential		Integral curb, gutter and sidewalk required

Secondary commercial industrial		Integral curb, gutter and sidewalk required

Major residential		Integral curb, gutter and sidewalk required

Major commercial industrial		Integral curb, gutter and sidewalk required

B.

Hillside Areas. For hillside areas, with a cross slope of fifteen percent and above, and with the right-of-way to contain slope:

3.53 HILLSIDE AREAS (15% and above, Cross Slope) right-of-way to contain slope

Type of Street, and Adjacent Land Use	Cross Section for Lot Size above 10,000 square feet	Curb, gutter and sidewalk requirements

Minor Residential		Graded area required

Minor Commercial Industrial		Integral curb, gutter and sidewalk

Collector Residential		Integral curb, gutter and sidewalk

Collector Commercial, Industrial		Integral curb, gutter and sidewalk

Residential, Single side Access Street		"V" concrete gutters 3′ graded area one side

Major, Secondary All Areas

(Ord. 43-62 §§3.52, 3.63, 1963).

17.12.270 - Improvements—Conformance with engineering standards.

All improvements shall conform to the engineering standards of the city as adopted by the city council. Any deviation shall be only with the written approval of the city engineer.

B.

(Ord. 43-62 §3.60, 1963).