Chapter 17.36 — M-2 GENERAL INDUSTRIAL DISTRICT

The purpose of the M-2, general industrial district classification is to provide opportunities for heavy industrial land uses and support facilities. This district is consistent with the general industry category of the development pattern and community organization element of the county general plan.

B.

The specific regulations of this chapter and the general rules set forth in Chapter 17.08 shall apply in all M- 2 districts.

(Ord. 1228 §2(Ch. 27, Art. 1), 1983)

Uses permitted in an M-2 district shall be as follows:

A.

Uses permitted in M-1 district.

B.

The following specific uses which shall be permitted only in M-2 districts:

1.

Wholesale lumberyards, lumber mills,

2.

Pottery kilns and ceramic works of heavy industrial types,

3.

Concrete batching plants,

Blacksmith shops, casting foundries;

5.

Fuel Yards (a large-scale facility where fuel such as propane and gasoline is stored and distributed without retail sales).

C.

The following when enclosed with a solid wall or fence not less than six feet in height and of a type approved by the planning commission:

1.

Building material storage yard, contractors storage yard,

2.

Junkyard.

(Ord. 1683 §2(part), 1997; Ord. 1228 §2(Ch. 27, Art. 2), 1983)

(Ord. No. 2105, § 1, 5-18-2021)

Uses requiring use permits in an M-2 district shall be as follows: lawful uses not otherwise provided for in this chapter and not found to be similar to uses listed herein.

(Ord. 1683 §2(part), 1997)

Yard requirements in an M-2 district shall be as follows:

A.

Front yard, fifty feet from the centerline of roadway or twenty feet from the property line, whichever is greater;

B.

Side yards, none, except as required by the building code or other regulations;

C.

Rear yard, none.

(Ord. 1683 §2(part), 1997; Ord. 1228 §2(Ch. 27, Art. 4 (part)), 1983)

17.36.050 - Lots.

Lot requirements in an M-2 district shall be as follows:

A.

Lot area, none;

B.

Width, none.

(Ord. 1228 §2(Ch. 27, Art. 4(part)), 1983)

17.36.060 - Minimum height, bulk and space requirements.

Minimum height, bulk and space requirements in an M-2 district shall be as follows: none.

(Ord. 1228 §2(Ch. 27, Art. 4(part)), 1983)

17.36.070 - Building height and coverage.

Building requirements in an M-2 district shall be as follows:

A.

Lot coverage, none;

B.

Building height limit, same as specified for C-2 districts.

(Ord. 1228 §2(Ch. 27, Art. 4(part)), 1983)

Loading area in an M-2 district shall be as follows: private off-street space for the handling of all materials and equipment.

(Ord. 1228 §2(Ch. 27, Art. 4(part)), 1983)

Chapter 17.38 - PD PLANNED DEVELOPMENT DISTRICT

Sections: