Chapter 17.34 — M-1 LIGHT INDUSTRIAL DISTRICT

A.

The purpose of the M-1, light industrial district classification is to provide opportunities for light industrial land uses and support facilities. This district is consistent with the general industry category of the land use and housing elements of the county general plan. This industrial district includes low-intensity manufacturing and assembly processes, research and development, corporate headquarters, offices, medical and health facility uses, and other uses as specified in this chapter. The land uses allowed and

development standards required are intended to protect adjacent areas from impacts while allowing indoor, clean and quiet industry. This district allows for business parks with tenants that may include some commercial and office activities.

B.

The specific regulations of this chapter and the general rules set forth in Chapter 17.08 shall apply in all M- 1 districts.

(Ord. No. 2054, § 2, 3-27-2018)

Uses permitted in an M-1 district shall be as follows:

A.

The following uses and other uses of similar character:

1.

Assembly of products;

2.

Wholesale/retail distribution and storage warehouses;

3.

Crop production and horticulture;

Public facility;

5.

School (trade);

6.

Construction and building material yard and sales, except gravel, rock and cement material yards;

7.

Research and development laboratories;

8.

Offices, accessory;

9.

Personal services;

10.

Data center;

11.

Wholesale commercial uses;

12.

Art, antiques, collectibles;

13.

Minor manufacturing, processing, fabricating, refining, repairing, packaging or treatment of goods, material or produce by electric power, oil or gas, except operations involving fish fats and oils, bones and meat products, or similar substances commonly recognized as creating offensive conditions in the handling thereof.

Retail lumber yards;

15.

Electronic assembly and repair;

Veterinary clinics;

17.

Indoor recreation and fitness.

B.

The following when conducted within a building or enclosed within a solid wall or fence not less than six feet in height:

1.

Body and fender repair shops, auto painting shops,

2.

Sheet metal shops, welding shops,

3.

Recycle facility, processing,

4.

Commercial equipment and vehicle repair.

C.

Living quarters when accessory to the principal permitted use.

D.

Any change in use or occupancy of an existing structure shall require administrative review by the planning department and shall meet the development design standards in section 17.08.090 prior to issuance of a building permit.

(Ord. No. 2054, § 3, 3-27-2018)

17.34.030 - Uses requiring a conditional use permit.

A.

Restaurants.

B.

Automobile and recreational vehicle sales, new and used.

C.

Fuel Yards (a large-scale facility where fuel such as propane and gasoline is stored and distributed without retail sales).

(Ord. No. 2054, § 4, 3-27-2018)

17.34.040 - Yards.

Yard requirements in an M-1 district shall be as follows:

A.

Front yard, twenty feet from the property line;

B.

Side yards, none, except as required by the building code or other regulations;

C.

Rear yard, none, except as required by the building and fire code.

(Ord. No. 2054, § 5, 3-27-2018)

17.34.050 - Lots.

Lot requirements in an M-1 district shall be as follows:

A.

Lot area, none.

B.

Width, none.

(Ord. No. 2054, § 6, 3-27-2018)

17.34.060 - Minimum height, bulk and space requirements.

Minimum height, bulk and space requirements in an M-1 district shall be as follows: none.

(Ord. No. 2054, § 7, 3-27-2018)

Building requirements in an M-1 district shall be as follows:

A.

Lot coverage, none.

B.

Building height shall not exceed 65 feet.

(Ord. No. 2054, § 8, 3-27-2018)

Loading area in an M-1 district shall be as follows: private off-street space for the handling of all materials and equipment.

(Ord. No. 2054, § 9, 3-27-2018)

Chapter 17.36 - M-2 GENERAL INDUSTRIAL DISTRICT

Sections: