Series 100 — INTRODUCTORY PROVISIONS›Article 103 — RULES OF MEASUREMENT
103.06: MEASURING LOT WIDTH AND DEPTH:
Porterville Zoning Code · 2026-07 edition · updated 2026-07-09 · Porterville
A. Lot Width: "Lot width" is the horizontal distance between the side lot lines, measured at right angles to the lot depth at a point midway between the front and rear lot lines.
B. Lot Depth: Lot depth is measured along an imaginary straight line drawn from the midpoint of the front property line of the lot to the midpoint of the rear property line or to the most distant point on any other lot line where there is no rear lot line. FIGURE 103.06: MEASURING LOT WIDTH AND DEPTH
(Ord. 1801, 12-3-2013)
Get a plain-English answer with a citation back to this text.
Ask AI about this code▸ Contents — Porterville Zoning Code
-
▸ Series 100 — INTRODUCTORY PROVISIONS
Overview- Article 100 — TITLE, COMPONENTS, AND PURPOSES
- Article 101 — ZONING DISTRICTS, ZONING MAP, AND BOUNDARIES
- Article 102 — RULES FOR CONSTRUCTION OF LANGUAGE
-
▸ Article 103 — RULES OF MEASUREMENT
Overview- 103.01: PURPOSE:
- 103.02: GENERAL PROVISIONS:
- 103.03: FRACTIONS:
- 103.04: MEASURING DISTANCES:
- 103.05: MEASURING HEIGHT:
- 103.06: MEASURING LOT WIDTH AND DEPTH:
- 103.07: DETERMINING AVERAGE SLOPE:
- 103.08: DETERMINING FLOOR AREA:
- 103.09: DETERMINING FLOOR AREA RATIO:
- 103.10: DETERMINING LOT COVERAGE:
- 103.11: DETERMINING LOT FRONTAGE:
- 103.12: DETERMINING SETBACKS (YARDS):
- 103.13: MEASURING SIGNS:
- Series 200 — BASE DISTRICTS
- Series 300 — ADDITIONAL USE AND DEVELOPMENT REGULATIONS
- Series 400 — LAND DIVISIONS
- Series 500 — OVERLAY DISTRICTS
- Series 600 — ADMINISTRATION AND PERMITS
- Series 700 — GENERAL TERMS