Skip to content
ChatProjectCodes

Chapter 16.60 — MONUMENTS

Patterson Municipal Code · 2026-07 edition · updated 2026-09-27 · Patterson

§ 16.60.010. Requirements.

  • A. At the time of making the survey for the final map, the engineer or surveyor shall set sufficient durable monuments to conform with the standards described in Section 8771 of the Business and Professions Code so that another engineer or surveyor may readily retrace the survey.

  • B. The engineer or surveyor shall also set the following additional monuments: Permanent monuments of a type approved by the city engineer shall be set at all angle points on the exterior boundaries of the subdivision, and at all lot corners, block corners and intersections of street centerlines. Monuments shall be not less permanent than a three-quarter inch galvanized pipe, thirty inches in length and placed so that the top is not less than one foot below finished grade.

  • C. Monuments or bench marks used in the subdivision shall be noted on the final map.

  • D. All monuments necessary to establish the exterior boundaries of the subdivision shall be set or referenced prior to recordation of the final map.

  • (Ord. 268 § 1 (part), 1976)

Exceptions & meaning →

Get a plain-English answer with a citation back to this text.

Ask AI about this code
Export this section
▸Contents — Patterson Municipal Code
Patterson Municipal Code

GoCodebook provides public access, search, citation, multilingual explanation, and practical interpretation of legally adopted building regulations. It is not a substitute for the official ICC or California code publications.