6-872 - Floor area ratio.

The following floor area ratio restrictions apply in the M-R-O district:

(a)

Office Use. On any office site, the maximum floor area of all buildings shall be no greater than 0.30 times the area of the site.

(b)

Combined Office/Residential Use. On any combined-use site, where 50 percent or more of the floor area will be residential, the maximum floor area of all buildings shall be no greater than 1.0 times the area of the site. Where less than 50 percent of the floor area will be residential, the maximum floor area of all buildings shall be no greater than 0.50 times the area of the site.

(c)

Residential Use. On any residential site, the maximum floor area shall be no greater than 1.0 times the area of the site.

(Ord. 280 § 8, 1982: Ord. 139 § 2 (part), 1975)

(Ord. No. 696, § 3(Exh. A), 1-13-2025)

The maximum and minimum residential densities for lots within the M-R-O district shall conform to the density standards specified in the applicable land use designation of the General Plan Land Use Element and as outlined in Program 10.3.g of the 2023-2031 6 th Cycle Housing Element.

(Ord. No. 696, § 3(Exh. A), 1-13-2025)