Article V — Signs In Industrial Zones

Except as prescribed in HMC § 17.56.150 through § 17.56.250 , special purpose signs, only the signs set forth in HMC § 17.56.380 through § 17.56.400 shall be permitted in an industrial zone. (Ord. 441 § 1, 2000)

For each use, one single-faced, lighted wall or canopy sign, not exceeding one square foot of area for each lineal foot of building or portion thereof may be placed on the side of the building facing the major street frontage, up to a maximum of 100 square feet. (Ord. 441 § 1, 2000)

• A. For each use, one single-faced, lighted wall or canopy sign, not exceeding one square foot of area for each lineal foot of building or portion thereof, may be placed on the side of the building facing the major street frontage, up to a maximum of 100 square feet.

• B. For each use, one lighted, freestanding sign not exceeding 75 square feet in area shall be permitted; provided, that there shall be no more than one such sign per lot or parcel of land. Where more than one use is being conducted on a single lot or parcel of land, the permitted sign area for each use shall be combined into one freestanding sign up to a maximum of 100 square feet. Freestanding signs shall not exceed 30 feet in height.

• (Ord. 441 § 1, 2000)

One lighted sign not exceeding 30 square feet in area shall be permitted. Freestanding signs shall not exceed six feet in height.

(Ord. 441 § 1, 2000)