Chapter 15.06 — GRADING

Hesperia Municipal Code · 2026-09 edition · updated 2026-10-02 · Hesperia

15.06.010 - General provisions.¶

15.06.020 - Definitions.¶

15.06.030 - Permits required.¶

15.06.040 - Permit application submittals.¶

15.06.050 - Grading inspection.¶

15.06.060 - Excavations.¶

15.06.070 - Fills.¶

15.06.080 - Setbacks.¶

15.06.080.¶

15.06.090 - Drainage and terracing.¶

15.06.100 - Slope planting and erosion control.¶

15.06.110 - National Pollutant Discharge Elimination System (NPDES) compliance.¶

15.06.120 - Referenced standards.¶

1.1 ASTM D 1557 Laboratory Characteristics Compaction of Soil Using Modified Effort¶

1.2 ASTM D 1556 Density and Unit Weight of Soils in Place by the Sand Cone Method¶

1.3 ASTM D 2167 Density and Unit Weight of Soils in Place by the Rubber-Balloon Method¶

1.4 ASTM D 2937 Density of Soils in Place by the Drive-Cylinder Method¶

1.5 ASTM D 2922 Density of Soil and Soil Aggregate in Place by Nuclear Methods¶

1.6 ASTM D 3017 Water Content of Soil and Rock in Place by Nuclear Methods¶

Get a plain-English answer with a citation back to this text.

Ask AI about this code

Export this section

▸Contents — Hesperia Municipal Code

Hesperia Municipal Code

GoCodebook provides public access, search, citation, multilingual explanation, and practical interpretation of legally adopted building regulations. It is not a substitute for the official ICC or California code publications.