Chapter 17.21 — TRADITIONAL COMMUNITY DEVELOPMENT ZONES

This chapter lists the land uses that may be allowed within the traditional community development zones established by Section 17.12.020 (zoning map and zones), determines the type of planning permit/approval required for each use, and provides basic standards for site layout and building size.

Development and new land uses proposed within the traditional community development zones shall comply with the standards in this chapter for the applicable zone, as follows:

A.

Building Placement. Each proposed structure shall comply with the build-to line, setback, and buildable area requirements in Sections 17.21.040 through 17.21.090 as required for the applicable zone, except as provided by Section 17.30.030 (build-to-line and setback requirements and exceptions), and except for the encroachments allowed in each zone by Sections 17.21.040 through 17.21.090.

B.

Use. Only the land uses allowed by Sections 17.21.040 through 17.21.090 shall be established in the applicable zone in compliance with Chapter 17.20 (development and land use approval requirements).

C.

Height. No structure shall exceed the height limit established by Sections 17.21.040 through 17.21.090 for the applicable zone, except as provided by Section 17.30.050 (height limits and exceptions).

D.

Parking. On-site parking shall be provided and located in compliance with Sections 17.21.040 through 17.21.090 for the applicable zone, and designed in compliance with Chapter 17.36 (parking and loading).

E.

Frontage Types. Only the frontage types allowed by Sections 17.21.040 through 17.21.090 shall be constructed in the applicable zone, in compliance with Section 17.21.100 (frontage type standards).

A.

Town Core (TC). The primary intent of this zone is to strengthen the mixed-use, pedestrian-oriented nature of the existing historic downtown. The secondary intent is to establish secondary mixed-use, pedestrianoriented centers within large, regional districts that are likely to redevelop in the mid and long term. These areas include large, auto-oriented commercial districts. The redeveloped centers will encourage compact development, provide a wide range of housing opportunities, including work force housing, and promote walkable and bikeable communities. The TC zone may be applied to areas previously designated with the C-2 and C-2-A zoning districts, provided that:

1.

Shopfront-related frontage types only with ground floor commercial are required;

2.

The zone will continue to promote a mix of residential, commercial, civic, and institutional uses;

3.

The zone will focus on the existing downtown area; and

4.

This zone may also be an option for auto-oriented commercial districts to allow them to evolve into mixeduse centers as time and economic opportunity allow.

B.

Neighborhood Center (NC). The primary intent of this zone is to strengthen the existing neighborhood structure of Grass Valley by promoting and enhancing the vitality of existing neighborhood-serving commercial centers and thus promoting pedestrian-oriented neighborhoods. The secondary intent is to create additional mixed-use centers/nodes, for instance along corridors, that will provide focal points for mixed-use infill development. This will provide opportunities for redevelopment in a manner that will convert such corridors from their current nondescript and uniform character into vibrant pedestrian-oriented neighborhoods that strengthen the character of Grass Valley. The NC zone may be applied to properties previously designated in a number of existing zoning districts, provided that:

1.

The zone can be expanded to use name of neighborhood (e.g. "NC-Sunrise Hill");

2.

Shopfront frontage types only are required (at a smaller scale than core); and

3.

The zone is intended to encourage mixed-use buildings that are compatible in size, shape, and scale with existing residential neighborhoods.

C.

Neighborhood Center-Flex (NC-Flex). The primary intent of this zone is to work in combination with the NC zone to promote the vitality of corridors and centers within different neighborhoods. This zone intends to promote flexibility of use, allowing the market to determine ground floor character while establishing the built form in order to ensure neighborhood compatibility. The nature of development within these zones will be informed by and will enhance the character of existing conditions within historic neighborhoods. The South Auburn corridor is a good example of an area appropriate for the application of this zone. The NCFlex zone standards may apply to properties designated with a variety of existing zoning districts, including OP, R-1, C-1, C-2, and R-3, provided that the zone:

1.

May use the name of the applicable neighborhood or area (e.g. "NC-Flex-S. Auburn Corridor");

2.

Allows for medium/high density housing near mixed-use centers to help support the centers and promote a walkable neighborhood;

3.

Allows residential or commercial on ground floors; and

4.

Anticipates that frontages are likely to vary (between zero feet and twelve feet) by specific area based on existing conditions.

D.

Neighborhood General-3 (NG-3). The intent of this zone is to reinforce the character of the existing neighborhood fabric while encouraging additional housing to be provided. This zone will require welldesigned density in the form of larger buildings that maintain a compatible size, shape, and scale with existing neighborhood architecture. Good examples of the scale and character of this housing should be large historic homes within the city that have been divided into multiple apartments. The NG-3 zone may be applied to properties previously designated in the R-2A and R-3 zoning districts, provided that the zone:

May include the name of the applicable neighborhood or area (e.g. "NG-3-Ohio Heights");

2.

May be applied to areas that have historically been single-family but have been designated to evolve into higher density housing due to location within neighborhoods and near centers; and

3.

The development standards will reinforce the character of the existing historic fabric along the street, but in a way that may encourage additional housing to be provided.

E.

Neighborhood General-2 (NG-2). The primary intent of this zone is to strengthen the character of existing historic neighborhoods within Grass Valley. It seeks to protect and enhance the unique character of existing neighborhoods, particularly in locations where this character may be most susceptible to change. The NG2 zone may be applied to properties previously designated within the R-1 and R-2 zoning districts, provided that the zone:

1.

May include use name of the applicable neighborhood or area (e.g. "NG-2-Sunrise Hill");

2.

Will work in coordination with existing preservation standards or guidelines; and

3.

May designate specific areas within historic neighborhoods that have atypical existing conditions, such as extremely small lots or houses, within which specific development standards may be created to preserve the character.

==> picture [420 x 218] intentionally omitted <==

B. Lot

==> picture [420 x 215] intentionally omitted <==

==> picture [456 x 546] intentionally omitted <==

(Ord. No. 818, § 3(Exh. A), 9-13-2022)

==> picture [420 x 205] intentionally omitted <==

Building Placement

Notes:

All floors must have a primary ground-floor entrance which faces the street.

Notes: Mansard roof forms are not allowed.

Buildings greater than 16 units must provide adequate common space for residents in the form of community rooms, roof terraces, or courtyards.

Any section along the BTL not defined by a building must be defined by a 4' to 6' high fence or stucco or masonry wall.

==> picture [420 x 201] intentionally omitted <==

==> picture [457 x 546] intentionally omitted <==

(Ord. No. 818, § 3(Exh. A), 9-13-2022)

==> picture [446 x 228] intentionally omitted <==

Building Placement

• All heights measured to eaves or base of parapet

Notes:

Mansard roof forms are not allowed.

Street edge must be defined by a 2'6" to 4' high fence or stucco or masonry wall.

==> picture [420 x 201] intentionally omitted <==

==> picture [408 x 492] intentionally omitted <==

(Ord. No. 818, § 3(Exh. A), 9-13-2022)

==> picture [408 x 212] intentionally omitted <==

==> picture [408 x 196] intentionally omitted <==

==> picture [409 x 492] intentionally omitted <==

(Ord. No. 818, § 3(Exh. A), 9-13-2022)

==> picture [408 x 196] intentionally omitted <==

** All heights measured to eaves or base of parapet.

Notes:

(1) Carriage houses may be 2 stories and 25' max. height. Mansard roof forms are not allowed.

Street edge must be defined by a 2'6" to 4' high fence or stucco or masonry wall.

==> picture [408 x 203] intentionally omitted <==

==> picture [409 x 492] intentionally omitted <==

(Ord. No. 818, § 3(Exh. A), 9-13-2022)

==> picture [408 x 485] intentionally omitted <==