Earlier editions: 2026-07
Title 6 — Vehicles›Part I — Traffic›Chapter 6.68 — MOVEMENT OF VEHICLES AND EQUIPMENT
Dublin Municipal Code Art. IV Moving Oversize/Overweight Vehicles
Dublin Municipal Code · 2026-10 edition · updated 2026-10-04 · Dublin
Cite as: Dublin Municipal Code Article IV · Text as of 2026-10-04
§ 6.68.250. Findings required.¶
No permit shall be issued for any oversize/overweight vehicle as defined in Section 6.68.010 unless the City Engineer finds that:
A. Any building as defined in Section 6.68.010, except a building being moved out of the city, meets the city building code requirements in effect at the time the building was constructed except as otherwise required by the City Engineer; and
B. All applicable federal and state regulations have been complied with.
(Ord. 13 § 1 (part), 1982; Ord. 16-89 § 28)
§ 6.68.260. Street obstruction prohibited.¶
No building or oversize/overweight vehicle being moved on, over, or through any street shall be allowed to remain in any one location on such street for a longer period than necessary to move the building or oversize/overweight vehicle along its route except with the written consent of the City Engineer.
(Ord. 13 § 1 (part), 1982; Ord. 16-89 § 29)
§ 6.68.270. Compliance with traffic laws required.¶
The permittee shall comply with the general laws regulating travel over a street, including posted signs or notices which limit speed or direction of travel, or the weight, width or height that may be moved thereon or thereover, or otherwise restrict or control travel on a street.
(Ord. 13 § 1 (part), 1982; Ord. 16-89 § 30)
§ 6.68.280. Removal of poles, wires, supporting structures.¶
In the event that the moving of any building or oversize/overweight vehicle for which a permit shall have been granted hereunder makes it necessary to move, remove, or displace any pole or other structure supporting the wires, cables, or other equipment of any public utility in the city, or to cut, displace or change the location of any wire, cable, or other equipment upon said poles or structure the permittee shall notify the owner or owners of such pole or structure and/or the wires, cables, or other equipment thereon, at least five (5) working days prior to the time that the moving of such building or oversize/overweight vehicle will necessitate the removal of such obstructions:
A. The permittee shall not at the expiration of said time of notice, or at any time, cut, move, or in any way disturb such public utility or city property; and, unless otherwise required or authorized by the City Engineer, such work shall be done only by the authorized workmen of the public utility interested or, if city property, by city employees.
B. The permittee shall pay to said public utility, or to the city, as the case may be, any and all costs or expenses for the removal, rearrangement and/or displacement of any pole or other structure or equipment thereon or of any damage to such property.
(Ord. 13 § 1 (part), 1982; Ord. 16-89 § 31)
§ 6.68.290. Removal of trees, plants or shrubs.¶
In the event that the moving of any building or oversize/overweight vehicle for which a permit shall have been granted hereunder makes it necessary to trim, move, remove, or replant any tree, plant, or shrub belonging to or under the control of the city, the permittee shall notify the City Engineer at least five (5) working days prior to the time that the moving of such building or oversize/overweight vehicle, or object will necessitate the removal of such obstructions:
A. The permittee shall not at the expiration of said time of notice or at any time, move, remove, replant or otherwise disturb such trees, plants or shrubs; and such work shall be done only by city employees unless otherwise approved and so ordered by the City Engineer.
B. The permittee shall pay to the city any and all costs or expenses for the trimming, moving, removing, or replacing of trees, plants, or shrubs or of any damage thereto.
(Ord. 13 § 1 (part), 1982; Ord. 16-89 § 32)
Get a plain-English answer with a citation back to this text.
Ask AI about this code