32-25 M-25 MULTIFAMILY RESIDENTIAL DISTRICT.

The purpose of the M-25 Multifamily Residential District is to:

a. Create development standards appropriate for compact, high density and high/medium density, multifamily residential development including apartments, townhouses, or condominiums living.

b. Assure that future development compliments Danville's existing small town character and established quality of life.

c. Integrate new development in a manner that is visually and functionally compatible with the physical character of the surrounding community.

d. Minimize the impacts of uses, protect residents from the harmful effects of excessive noise, overcrowding, excessive traffic, insufficient parking and other adverse environmental effects.

e. Ensure adequate provisions for sites, with reasonable access to public services, for appropriate public and semipublic land uses, including care facilities, needed to complement residential development or that require a residential environment. At the same time, protect the relatively quiet, primarily noncommercial, family atmosphere of neighborhoods,

f. Be consistent with the Danville General Plan Multifamily High Density (twenty-five through thirty (25-30) units per acre) and the Multifamily High/Medium Density (twenty through twenty-five (20-25) dwelling units per acre) land use designations.

(Ord. #2014-05, § 2)

a. Conform to M-35 District, Section 32-29. Except as specified, the M-25 District shall comply with all of the provisions established under the M-35 Multifamily District.

b. Differences from the M-35 District. The following items for M-25 district are different from those for M-35 district:

1. Maximum Unit Density. The maximum residential density allowed in this district is twenty-five (25) dwelling units per acre.

2. Minimum Unit Density. The minimum residential density allowed in this district is twenty (20) dwelling units per acre.

• (Ord. #2014-05, § 2; Ord. #2024-01, § 8)