§ 17.28

In M-2 districts, permitted uses shall be as follows:

A.

Uses permitted in the M-1 zone are permitted, and upon securing a conditional use permit, an on-site residence may be permitted, provided the occupation of such residence will not exceed one third of the square footage of an active business establishment and occupied by the owner/proprietor or their agent. Such residence is to be a secondary use to an active industrial enterprise. No residential garage shall be permitted.

B.

The following specific uses which shall be permitted only in M-2 districts:

1.

Wholesale lumber yard, lumber mills,

Pottery kilns and ceramic works of heavy industrial types,

3.

Concrete batching plants,

4.

Blacksmith shop, casting foundries,

5.

The following when enclosed within a solid wall or fence not less than six feet in height, and of a type approved by the planning commission.

a.

Building material storage yard, contractor's storage yard,

b.

Junkyard, vehicle wrecking yard. A solid fence a minimum of eight feet in height will be required.

(Ord. 589 §10, 2001; Ord. 558 (part), 1996; Ord. 524 §15, 1992; Ord. 153 §14.02, 1959).

17.28.030 - Uses requiring use permits.

In M-2 districts, uses requiring use permits shall be as follows:

lawful uses not otherwise provided for in this chapter.

(Ord. 153 §14.03, 1959).

17.28.040 - Minimum height, bulk and space requirements.

In M-2 districts, permitted uses shall be as follows:

A.

Lot area, width, coverage and front yard, none;

B.

Side yard, none, except as required by the Building Code or other regulations;

C.

Rear yard, none;

D.

Automobile parking, same as M-1 districts;

E.

Loading area, private off-street space for the handling of all materials and equipment;

F.

Building height limit, same as specified for C-2 districts.

(Ord. 153 §§14.10-14.16, 1959).

Chapter 17.30 - M-L LIMITED MANUFACTURING DISTRICT