Division 5 — Site Requirements
§ 9125.4. Minimum Lot Width.
Carson Zoning Code · 2026-06 edition · updated 2026-07-25 · Carson
No lot shall be created unless it has a width of at least fifty (50) feet for an interior lot or fifty-five (55) feet for a corner lot.
Any existing lawfully established lot is deemed to have the required width.
No lot shall be reduced to less than the required width, except a portion of a lot may be acquired for public purposes provided the lot width of the remainder is not less than forty (40) feet.
This Section does not apply to lots created through an urban lot split. (Ord. 22-2210 § 8)
Get a plain-English answer with a citation back to this text.
Ask AI about this code▸ Contents — Carson Zoning Code
- Article 9 — Planning and Zoning
- Chapter 1 — ZONING
- Division 1 — Title, Authority And Purpose
- Division 2 — Format
- Division 3 — Zoning Classifications
- Division 4 — Zoning Boundaries
- Division 1 — Uses Permitted
- Division 2 — Accessory Uses
- Division 3 — Conditional Use Criteria
- Division 4 — Density
- Division 6 — Site Development Standards
- Division 7 — Environmental Effects
- Division 8 — Special Requirements For Certain Uses
- Division 4 — (Reserved)
- Division 8 — Special Requirements For Certain Uses
- Division 4 — (Reserved)
- Division 8 — Special Requirements For Certain Uses
- Division 4 — (Reserved)
- Division 9 — Special Use Zones
- Division 1 — Street Dedication And Improvement
- Division 2 — Vehicular Parking, Loading And Maneuvering Areas
- Division 3 — Walls
- Division 4 — Trash And Recycling Areas
- Division 5 — Transportation Demand And Trip Reduction Measures
- Division 6 — Project Grading
- Division 7 — Signs
- Division 8 — Water Efficient Landscaping
- Division 1 — Procedures In General
- Division 2 — Procedures By Type
- Division 1 — Applicability Of Regulations
- Division 2 — Nonconformities
- Division 3 — Relationship Of Zoning Regulations To Other Laws …
- Division 4 — Interpretation Of Provisions
- Division 5 — Violations And Penalties
- Division 6 — Assignment Of Authority, Powers And Duties
- Division 1 — Definitions