Title 17 — ZoningDivision III — OVERLAY AND COMMUNITY PLAN DISTRICTSChapter 17.20 — OVERLAY DISTRICTS

Article VI — Annexed County Lots Overlay District

Carmel-by-the-Sea Zoning Code · 2026-06 edition · ingested 2026-07-06 · Carmel-by-the-Sea

§ 17.20.230. Purpose.

The purpose of the annexed county lots overlay district is to regulate specific residential lots annexed to the City of Carmel-by-the-Sea with the intention that the City would retain minimum lot size requirements for the lots that applied prior to annexation.

(Ord. 2004-01 § 1, 2004; Ord. 2004-02 § 1, 2004)

§ 17.20.240. Boundaries of C Overlay District.

Table 17.20-A: Boundaries of C Overlay District Designation Block Lots

R-1-C-6

Table 17.20-A: Boundaries of C Overlay District Table 17.20-A: Boundaries of C Overlay District Table 17.20-A: Boundaries of C Overlay District
Designation Block Lots
Mission Tracts No. 1 and No. 3
Carmel Mission
Walker Tract
3
8
9
All
1
2
Lots 7 and 8
Lots 1 through 15
All Lots
All
All Lots
All Lots
R-1-C-10
Mission Tract No. 2
4 Lots 10 through 15
R-1-C-20
Walker Tract
Mission Tract No. 2
3
4
Lots 1 through 14
Lots 1 – 9, 16 and 17

(Ord. 2004-01 § 1, 2004; Ord. 2004-02 § 1, 2004)

§ 17.20.250. Minimum Lot Size.

A number placed after the C designation in the zone name shall specify the minimum lot size requirements for lots in the C overlay district. This number shall represent the minimum number of thousands of square feet of lot size that must be maintained in the C overlay district. The following designations apply:

Table 17.20-B: Minimum Lot Size Table 17.20-B: Minimum Lot Size
Minimum Lot Size Designation
6,000 square feet R-1-C-6
10,000 square feet R-1-C-10
20,000 square feet R-1-C-20

All standards and regulation of the R-1 district (except for those regulating lot size) apply to the C overlay district.

(Ord. 2004-01 § 1, 2004; Ord. 2004-02 § 1, 2004)