Appendix BL — HEMP-LIME (HEMPCRETE) CONSTRUCTION
Section BL102 — DEFINITIONS
2025 California Residential Code (Title 24, Part 2.5) · 2025 edition · updated 2026-07-27 · California
Italicized text is a California amendment to the model code, as printed in the official publication.
BL102.1 General. ¶
The following words and terms shall, for the purposes of this appendix, have the meanings shown herein. Refer to Chapter 2 for general definitions.
BINDER. The material that binds the hemp hurd in a hemp-lime mix.
BONDING COAT. The initial thin layer of binder-rich granulated plaster used in lined applications of hemp-lime construction to ensure adhesive and/or mechanical bonding. Also known as “gobetis.”
CASTING. Placing wet hemp-lime into forms.
CAST-IN-PLACE. Installation of hemp-lime mix by hand or by spraying into forms in its permanent location.
CLAY. Inorganic soil with particle sizes less than 0.00008 inch (0.002 mm) and having the characteristics of high dry strength and medium to high plasticity, used as a binder of other component materials in clay plaster.
CLAY SUBSOIL. Subsoil sourced directly from the earth, containing clay, sand and silt, and containing not more than trace amounts of organic matter.
FIBER CLUMPS. Long fibers that are attached to hemp hurd, or for other reasons, cause clumping of fibrous balls when agitated.
FINISH. Exposed surface material on the interior or exterior face of a hemp-lime infill wall.
FORM. The material into which hemp-lime infill, panels or blocks are cast.
FORMWORK. The system of forms, their bracing and fasteners assembled for casting of hemp-lime infill.
HAND-CAST. Hemp-lime infill cast by placing hemp-lime mix into formwork and evenly tamping by hand or with a tool.
HEMP. A class of the Cannabis sativa plant grown for industrial purposes in which the concentration of total delta-9 tetrahy-drocannabinol (THC) in the flowering tops is equal to or less than the regulated maximum level established by authorities having jurisdiction.
HEMP HURD. The chopped woody core of the stalks of the hemp plant, stripped of its surrounding hemp fibers. Also known as “hemp shiv” or “hemp shive.”
HEMPCRETE. Common usage term for hemp-lime.
HEMP-LIME. A bio-aggregate composite consisting of hemp hurd and a lime-based binder. Also known as “hempcrete.”
INFILL. Hemp-lime placed between or around the structural or nonstructural framing of a building as insulation, thermal mass and a substrate for finish.
LIFT. A horizontal layer of hemp-lime infill. LIME. Lime is composed of calcium hydroxide [Ca(OH) [2] ] including Type N or S hydrated lime, hydraulic lime, natural hydraulic lime or slaked quicklime.
LINED APPLICATION. Installation of a vertical hemp-lime layer, lining a masonry or concrete wall.
NATURAL CEMENT. Hydraulic cement made from naturally occurring limestone.
NONBEARING. Not bearing the weight of the building other than the weight of the hemp-lime infill and its finish.
PLASTER. Lime, clay, clay-lime or hemp-lime plaster as described in Section BL104.3, applied to the interior or exterior face of hemplime walls.
POZZOLAN. A siliceous or alumino-siliceous material that, when finely divided and combined with hydrated lime in the presence of water, forms new chemical compounds with cementitious properties.
on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.
APPENDIX BL — HEMP-LIME (HEMPCRETE) CONSTRUCTION
PRECAST. Blocks or panels of hemp-lime formed and cured before installation.
REED MAT. A mat consisting of reed, cane, bamboo or other similar plant material.
SCREEDING. Removal of excess material to form a planar surface.
SPRAY-APPLIED. A method of mechanical projection of hemp-lime applied onto or into a form using compressed air.
TADELAKT. A lime-plaster which is compressed, polished and treated with oil-based soap to make it water-repellent.
UNIT WALL WEIGHT. The unit wall weight is the calculated weight of a 1-foot by 1-foot (305 mm × 305 mm) section of wall surface area times the full wall thickness, including finishes. The unit wall weight is the sum of the weight of each constituent material times its volume, expressed as pounds per square foot (psf). VOID. Any space in a hemp-lime wall greater than [1] / 4 inch (6 mm) wide, 2 inches (51 mm) long and 2 inches (51 mm) deep.
Get a plain-English answer with a citation back to this text.
Ask AI about this code▸ Contents — 2025 California Residential Code (Title 24, Part 2.5)
- Chapter 1 — ADMINISTRATION
- Chapter 2 — DEFINITIONS
- Chapter 3 — BUILDING PLANNING
- Chapter 4 — FOUNDATIONS
- Chapter 5 — FLOORS
- Chapter 6 — WALL CONSTRUCTION
- Chapter 7 — WALL COVERING
- Chapter 8 — ROOF-CEILING CONSTRUCTION
- Chapter 9 — ROOF ASSEMBLIES
- Chapter 10 — CHIMNEYS AND FIREPLACES
- Chapter 44 — REFERENCED STANDARDS
- Appendix AA — BOARD OF APPEALS
- Appendix AB — PERMIT FEES
- Appendix AC — RESERVED
- Appendix BA — RESERVED
- Appendix BB — TINY HOUSES
- Appendix BC — RESERVED
- Appendix BD — RESERVED
- Appendix BE — RADON CONTROL METHODS
- Appendix BF — PATIO COVERS
- Appendix BG — SOUND TRANSMISSION
- Appendix BH — AUTOMATIC VEHICULAR GATES
- Appendix BI — LIGHT STRAW-CLAY CONSTRUCTION
- Appendix BJ — STRAWBALE CONSTRUCTION
- Appendix BK — COB CONSTRUCTION (MONOLITHIC ADOBE)
-
▸ Appendix BL — HEMP-LIME (HEMPCRETE) CONSTRUCTION
- Appendix BM — 3D-PRINTED BUILDING CONSTRUCTION
- Appendix BN — EXTENDED PLATE WALL CONSTRUCTION
- Appendix BO — EXISTING BUILDINGS AND STRUCTURES
- Appendix CA — RESERVED
- Appendix CB — RESERVED
- Appendix CC — RESERVED
- Appendix CD — RESERVED
- Appendix CE — RESERVED
- Appendix CF — RESERVED
- Appendix CG — NONSEWERED SANITATION SYSTEMS
- Appendix CH — PRIVATE SEWAGE DISPOSAL
- Appendix CI — SWIMMING POOL SAFETY ACT
- Appendix CJ — EMERGENCY HOUSING
- Appendix CK — AREAS PROTECTED BY THE FACILITIES OF THE CENTRAL…