Section 12 — 3-8—MANUAL ACTUATION TEST — 2025 California Referenced Standards Code (Title 24, Part 12)

12-3-8.1 Following the Operation Test, each of the two sample assemblies shall be operated five times, and the forces required to unlatch the system shall be measured and recorded. These forces shall not exceed the values indicated in Sections 12-3-8.2 through 12-3-8.4. 12-3-8.2 A force gauge shall be used to apply the actuating force. The force shall be applied in the orientation anticipated by the design, using an appropriate force gauge and attachments, such as hooks, loops or probes. The gauge shall be capable of measuring the maximum force applied on each attempt. The force shall be…

provision permitted lot commission district approval parking minimum height dwelling application requirement review coverage subject setback occupancy development standard accessory yard section structure compliance use provision permitted lot commission district approval parking minimum height dwelling application requirement review coverage subject setback occupancy development standard accessory yard section structure compliance use provision permitted lot commission district approval parking minimum height dwelling application requirement review coverage subject setback occupancy development standard accessory yard section structure compliance use provision permitted lot commission district approval parking minimum height dwelling application requirement review coverage subject setback occupancy development standard accessory yard section structure compliance use provision permitted lot commission district approval parking minimum height dwelling application requirement review coverage subject setback occupancy development standard accessory yard section structure compliance use

Ask AI about § 12