Title 10 — ZONING REGULATIONS›Chapter 1 — ZONING 1›Article 25 — BURBANK CENTER OVERLAY ZONE
Burbank Municipal Code Div. 6 Burbank Center Commercial Manufacturing (bccm) Zone
Burbank Municipal Code · 2026-10 edition · updated 2026-10-22 · Burbank
Cite as: Burbank Municipal Code Division 6 · Text as of 2026-10-22
10-1-2520: PURPOSE:¶
The Burbank Center Commercial Manufacturing (BCCM) Zone is intended to combine selected provisions of the C-4 Commercial Zone and the M-1 Industrial Zone to provide for the development of mixed commercial and light industrial uses, such as office/industrial parks. [Added by Ord. No. 3467, eff. 7/19/97.]
10-1-2520.5: GENERAL PLAN CONSISTENCY:¶
In the BCCM Zone, all uses shall be consistent with the maximum FAR and maximum residential density, as prescribed in the General Plan, as follows:
| General Plan Land Use Designation | Maximum FAR | Maximum Residential Density 1, 2 |
|---|---|---|
| Corridor Commercial | 1.0 FAR | 27 units/acre |
| Regional Commercial | 1.25 FAR | 58 units/acre |
| Downtown Commercial | 2.5 FAR | 87 units/acre |
| South San Fernando Commercial | 1.25 FAR | 43 units/acre |
| North Victory Commercial/ |
1.0 FAR | 27 units/acre |
| Rancho Commercial | 0.6 FAR | 20 units/acre |
| Media District Commercial | 1.1 FAR | 58 units/acre |
| Golden State Commercial/ |
1.25 FAR | 27 units/acre |
| Institutional | Max. floor area determined by Zoning | -- |
| Open Space | Max. floor area determined by Zoning | -- |
| Airport | Max. floor area determined by Zoning | -- |
| 1 with discretionary approval 2 Notwithstanding the maximum densities listed in this General Plan Consistency Table, for each site within the 2021-2029 Housing Element Opportunity Sites Overlay Zone (2021-2029 HEOS-OZ), the maximum residential density shall be the total net units for that site as listed in the column titled “Proposed Specific Plan Total Net Units” of Table 1-41 in the adopted 2021-2029 Burbank Housing Element. All other underlying base zoning land uses and development standards and procedures shall continue to apply. |
[Added by Ord. No. 3839, eff. 5/24/13; amended by Ord. 24-4,022, eff. 1/17/25.]
10-1-2521: USES IN THE BCCM ZONE:¶
In the BCCM Zone, uses are allowed as set forth in Section 10-1-502. [Added by Ord. No. 3467, eff. 7/19/97; Amended by Ord. No. 3504, eff. 12/26/98.]
10-1-2522 AND 2523:¶
[Deleted by Ord. No. 3504, eff. 12/26/98.]
10-1-2524: PROPERTY DEVELOPMENT STANDARDS:¶
Except as modified by Division 7 of this Article, all development shall comply with the standards of the C-4 Zone, specifically Section 10-1-724 et seq. Notwithstanding the foregoing, this Section shall not apply to the following projects:
Mixed-use developments (multifamily residential with nonresidential use) allowed as set forth in Section 10-1-502. These projects shall be governed by the provisions of Article 9, Division 4 of this Code, commencing with Section 10-1-915.
Multifamily residential-only developments allowed as set forth in Section 10-1-502. These projects shall be governed by the provisions of Article 6, Division 3.5 of this Code, commencing with Section 10-1-621. [Added by Ord. No. 3467, eff. 7/19/97; amended by Ord. No. 23-3,996, eff. 7/7/23; 23-3,994.]
Get a plain-English answer with a citation back to this text.
Ask AI about this code