Skip to content

Title 10 — ZONING REGULATIONS›Division 9 — Newly Constructed Residential Condominiums

Article 15 — GENERAL OFF-STREET LOADING STANDARDS

Burbank Zoning Code · 2026-07 edition · updated 2026-07-25 · Burbank

10-1-1501: LOADING SPACES REQUIRED:

Every hospital, institution, hotel, commercial or industrial building shall provide the following loading spaces:

Total Square Feet of Floor Area Loading Spaces Required
1. Office Buildings, Hospitals Hotels,
Institutions
10,000 -50,000 1
50,001 - 100,000 2
100,001 - and over 3
2. Restaurants 1
3. Industrial Buildings and other
Commercial Buildings
3,000 - 15,000 1
15,001 -40,000 2
40,001 - and over 3

[Formerly numbered Section 31-178; Renumbered by Ord. No. 3058, eff. 2/21/87; 2306.]

10-1-1502: LOADING SPACE DIMENSIONS:

Loading spaces shall be at least 300 square feet in area and shall have at least 14 feet of vertical clearance, except that the vertical clearance may be reduced when authorized by the Building Director. [Formerly numbered Section 31-179; Renumbered by Ord. No. 3058, eff. 2/21/87; 2930, 2306.]

10-1-1503: LOCATION OF AND ACCESS TO LOADING SPACES:

Loading spaces shall be so located and designed so that it shall not be necessary for vehicles using such space to back into a street. All loading spaces shall have a minimum depth of 30 feet from the property line when adjacent to a street.

Loading areas in commercial and industrial zones may not be located in any required front, street or interior side or rear yard. Loading areas in buildings of greater than 50,000 square feet in commercial and industrial zones must be separate from all required parking spaces and from travel lanes for parking areas. [Formerly numbered Section 31-180; Amended by Ord. No. 3297, eff. 8/15/92; 3058, 2598.]

==> picture [9 x 9] intentionally omitted <==

Table of Contents Previous Next

Table of Contents Previous Next

==> picture [9 x 9] intentionally omitted <==

Get a plain-English answer with a citation back to this text.

Ask AI about this code
▸ Contents — Burbank Zoning Code
Burbank Zoning Code
  1. ▸ Title 10 — ZONING REGULATIONS
    Overview
    1. Chapter 1
    2. ▸ Division 9 — Newly Constructed Residential Condominiums
      Overview
      1. Article 1 — GENERAL PLAN
      2. Article 2 — ZONING ORDINANCES AND DEFINITIONS
      3. Article 3 — CLASSIFICATIONS AND ZONE MAP
      4. Article 4 — ADMINISTRATION AND ENFORCEMENT
      5. Article 5 — USE TABLE AND GENERAL USE REGULATIONS
      6. Article 6 — RESIDENTIAL USES AND STANDARDS
      7. Article 7 — COMMERCIAL USES AND STANDARDS
      8. Article 8 — INDUSTRIAL USES AND STANDARDS
      9. Article 9 — MISCELLANEOUS USES AND STANDARDS
      10. Article 10 — SIGN AND ADVERTISING STRUCTURE REGULATIONS1
      11. Article 11 — GENERAL PROPERTY DEVELOPMENT REGULATIONS
      12. Article 12 — GENERAL YARD AND SPACE STANDARDS
      13. Article 13 — GENERAL HEIGHT STANDARDS
      14. Article 14 — GENERAL OFF-STREET PARKING STANDARDS
      15. Article 15 — GENERAL OFF-STREET LOADING STANDARDS
      16. Article 16 — GENERAL VEHICULAR ACCESS STANDARDS
      17. Article 17 — PROTECTION AGAINST NUISANCES
      18. Article 18 — NONCONFORMING LAND, USES AND STRUCTURES
      19. Article 19 — ZONING PROCEDURES AND AMENDMENTS
      20. Article 20 — RESIDENTIAL GROWTH MANAGEMENT
      21. Article 21 — MEDIA DISTRICT OVERLAY ZONE
      22. Article 22 — COMMUNITY FACILITY FEES
      23. Article 23 — TRANSPORTATION DEMAND MANAGEMENT
      24. Article 24 — RANCHO MASTER PLAN ZONES
      25. Article 25 — BURBANK CENTER OVERLAY ZONE
      26. Article 26 — MAGNOLIA PARK COMMERCIAL ZONES

GoCodebook provides public access, search, citation, multilingual explanation, and practical interpretation of legally adopted building regulations. It is not a substitute for the official ICC or California code publications.