Skip to content

Title 9 — Zoning and Planning Regulations›Division 4 — SUPPLEMENTAL DEVELOPMENT STANDARDS

Chapter 9.24 — ACCESSORY MANUFACTURING

Bell Gardens Zoning Code · 2026-06 edition · updated 2026-07-25 · Bell Gardens

§ 9.24.010. Applicable zones.

Manufacturing shall be permitted as an accessory use in the C-M zone only pursuant to the restrictions of this chapter.

(Ord. 806 § 1, 2007)

§ 9.24.020. Restrictions.

  • A. Such activity shall be restricted to the ground floor of the building or buildings and shall not occupy more than 25 percent of said ground floor area.

  • B. Not more than five employees shall be engaged in such activity.

  • C. A commercial appearance shall be maintained by office or window display space or both, across all the street or highway frontage of the building or buildings, except doorways, to a depth of not less than two feet.

  • D. Any portion of the building or buildings devoted to such activity shall be not nearer than 50 feet to any agricultural or residential zone.

  • E. The building shall be so constructed, the machinery and equipment shall be so installed and maintained, and the activity shall be so conducted, that all noise, vibration, dust, odor and all other objectionable factors shall be confined or reduced to the extent that no annoyance or injury will result to persons or property in the vicinity.

  • F. Any such activity shall be conducted wholly within a completely enclosed building.

  • G. Where a conflict in interpretation occurs regarding application of these provisions to any specific case, the commission shall make such determination.

  • (Ord. 806 § 1, 2007)

Get a plain-English answer with a citation back to this text.

Ask AI about this code
▸ Contents — Bell Gardens Zoning Code
Bell Gardens Zoning Code
  1. ▸ Title 9 — Zoning and Planning Regulations
    Overview
    1. Division 1 — GENERAL PROVISIONS
    2. Division 2 — LAND USE ZONES AND STANDARDS
    3. Division 3 — SPECIAL USES AND PROHIBITED USES Chapter 9.20. SP…
    4. ▸ Division 4 — SUPPLEMENTAL DEVELOPMENT STANDARDS
      Overview
      1. Chapter 9.22 — PURPOSE AND APPLICABILITY
      2. Chapter 9.24 — ACCESSORY MANUFACTURING
      3. Chapter 9.26 — ADEQUATE HIGHWAYS AND STREETS
      4. Chapter 9.28 — AUTOMOBILE AND OUTDOOR STORAGE
      5. Chapter 9.30 — BUILDING MASS PROVISIONS
      6. Chapter 9.32 — FENCES, WALLS AND HEDGES
      7. Chapter 9.34 — LANDSCAPING
      8. Chapter 9.36 — LOT AREA AND WIDTH PROVISIONS
      9. Chapter 9.38 — PARKING AND LOADING (OFF-STREET)
      10. Chapter 9.40 — SIGNS
      11. Chapter 9.42 — TEMPORARY USES AND STRUCTURES
      12. Chapter 9.44 — TRASH ENCLOSURES
      13. Chapter 9.46 — YARD PROVISIONS
      14. Chapter 9.48 — EASTERN AND FLORENCE AVENUES FACADE DESIGN STAN…
    5. Division 5 — ADMINISTRATION
    6. Division 6 — SUBDIVISION REGULATIONS

GoCodebook provides public access, search, citation, multilingual explanation, and practical interpretation of legally adopted building regulations. It is not a substitute for the official ICC or California code publications.