Article 2.5 — HEIGHT AND BULK DISTRICTS›SEC. 263. HEIGHT LIMITS: SPECIAL EXCEPTIONS.
SEC. 263.36. STONESTOWN MIXED-USE HEIGHT AND BULK DISTRICT.
San Francisco Planning Code · edición 2025 · actualizado 2026-07-08 · San Francisco
Esta sección aún no está traducida y se muestra en inglés.
(a) Boundaries of the Stonestown Mixed-Use Height and Bulk District. The boundaries of the Stonestown Mixed-Use Height and Bulk District are set forth in Sectional Map HT13 of the Zoning Map of the City and County of San Francisco and include all areas that are the subject of the Stonestown Special Use District set forth in Planning Code Section 249.9, as shown on Special Use District Map SU13.
(b) Purpose. The purpose of the Stonestown Mixed-Use Height and Bulk District is to enable development of the Stonestown Special Use District as a high-density, mixed-use, sustainable community consistent with the Purposes set forth in Planning Code Section 249.9 and the Stonestown Design Standards and Guidelines (DSG) referenced therein.
(c) Controls.
(1) In the Stonestown Mixed-Use Height and Bulk District, height and bulk and definitions applicable thereto are governed by Planning Code Section 249.9 (the Stonestown Special Use District) and the DSG referenced therein.
(2) Amendments to the height and bulk controls in this Stonestown Mixed-Use Height and Bulk District shall be as provided in Section 249.9.
(Added by Ord. 204-24, File No. 240409, App. 8/1/2024, Eff. 9/1/2024, Oper. 9/1/2024)