Skip to content

Windsor · Zoning · MDR

Windsor MDR zoning: height, setbacks and lot size

In Windsor's MDR zone, generally buildings can be up to 35 ft tall, the front setback is 10 ft and the minimum lot size is 2,700 sq. ft., with the conditions listed below (Windsor code, read October 2026).

Key points

  • Maximum building height: 35 ft
  • Minimum front setback: 10 ft (New development; the code also sets a maximum front setback of 20 ft)
  • Minimum side setback: 5 ft
  • Minimum rear setback: 15 ft
  • Minimum lot size: 2,700 sq. ft.
  • Maximum lot coverage: 60%
  • Maximum density: 16 units per acre

MDR (Medium Density Residential) is a zoning district in Windsor. Every value below was read from the Windsor Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in MDR

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
35 ft
§ 17.10.040 · code text
Table row “Primary Structure”, column “MDR”: 35
Minimum front setback
10 ft
Applies: New development; the code also sets a maximum front setback of 20 ft
§ 17.10.040 · code text
Table row “New Development (min.)”, column “MDR”: 10
Minimum side setback
5 ft
§ 17.10.040 · code text
Table row “Interior Side”, column “MDR”: 5
Minimum rear setback
15 ft
§ 17.10.040 · code text
Table row “Primary Building”, column “MDR”: 15
Minimum lot size
2,700 sq. ft.
§ 17.10.040 · code text
Table row “Area (sq. ft.)”, column “MDR”: 2,700
Maximum lot coverage
60%
§ 17.10.040 · code text
Table row “Parcel Coverage (max. percentage of total parcel area covered by structures)”, column “MDR”: 60
Maximum density
16 units per acre
§ 17.10.040 · code text
Table row “Maximum (du/ac.)”, column “MDR”: 16

Uses in MDR

Uses the code's use tables allow in MDR, or allow with a permit. Each links to its page with the code section.

When a different number applies

The code sets other values for particular lots, buildings or locations in MDR:

  • Minimum side setback: 0 ft — Zero lot line development may be authorized by Conditional Use Permit. § 17.10.050

Not on this page

We did not find a general stories, FAR limit for MDR in the zoning tables we read. The code may still set one elsewhere — check the Windsor Municipal Code.

Other Windsor zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Windsor's MDR zone?

35 ft — Windsor Municipal Code § 17.10.040.

What is the minimum front setback in Windsor's MDR zone?

10 ft (new development; the code also sets a maximum front setback of 20 ft) — Windsor Municipal Code § 17.10.040.

What is the minimum side setback in Windsor's MDR zone?

5 ft — Windsor Municipal Code § 17.10.040.

What is the minimum rear setback in Windsor's MDR zone?

15 ft — Windsor Municipal Code § 17.10.040.

What is the minimum lot size in Windsor's MDR zone?

2,700 sq. ft. — Windsor Municipal Code § 17.10.040.

General information, not legal advice.

Ask about a Windsor property in MDR

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Windsor