Skip to content

Walnut Creek · Building on your lot

Fences and walls in Walnut Creek

Walnut Creek limits residential fences to 3 feet in the required front setback and 7 feet in interior side, rear and corner side setbacks.

Key points

  • Fence height: Walnut Creek limits residential fences to 3 feet in the required front setback and 7 feet in interior side, rear and corner side setbacks.

Each rule below links to the section of the Walnut Creek Municipal Code it was read from, with the code text one click away (checked October 2026). General information, not legal advice.

What Walnut Creek's code says

Walnut Creek code What Walnut Creek's code adds
Side and rear yard height
  • No more than 3 feet, measured from the highest adjacent grade.
    Applies: For residential uses, within the corner side setback of a reversed corner lot.
    § 10-2.3.104 · code text
    No fence, wall, or similar structure shall exceed three (3) feet in height within the required front setback or within the corner side setback of a reversed corner lot, as measured from the highest adjacent grade.
  • No more than 7 feet, measured from the highest adjacent grade.
    Applies: For residential uses, within a required interior side or rear setback, or a corner lot's corner side setback.
    § 10-2.3.104 · code text
    No fence, wall or similar structure shall exceed seven (7) feet in height within a required interior side or rear setback, or corner side setback of a corner lot, as measured from the highest adjacent grade.
Height anywhere on the lot
  • Up to 8 feet for a solid fence or wall.
    Applies: Residential property next to a highway, along interior property lines by the highway. Over 7 feet needs a landscaped buffer.
    § 10-2.3.104 · code text
    a solid fence or wall may be installed along the interior property lines adjacent to the highway within the project site at up to eight (8) feet in height.
  • No single retaining wall over 7 feet, measured from finished grade to the top.
    Applies: Within a required setback.
    § 10-2.3.104 · code text
    No single retaining wall shall exceed seven (7) feet in height within a required setback as measured from the finished grade to the top of wall.
Front yard height
  • No more than 3 feet, measured from the highest adjacent grade.
    Applies: Within the required front setback of a residential lot.
    § 10-2.3.104 · code text
    No fence, wall, or similar structure shall exceed three (3) feet in height within the required front setback or within the corner side setback of a reversed corner lot, as measured from the highest adjacent grade.
Permit
  • A minor use permit is required to go above the maximum heights.
    Applies: For fences, walls, retaining walls or similar structures.
    § 10-2.3.104 · code text
    The maximum height standards for fences, walls, retaining walls, or similar structures, as previously specified in this section, may be increased through the issuance of a minor use permit pursuant to the appropriate provisions of Part IV, Article 8

Who this affects

HomeownersContractorsDesigners

Frequently asked questions

How tall can a fence be in Walnut Creek?

Walnut Creek limits residential fences to 3 feet in the required front setback and 7 feet in interior side, rear and corner side setbacks.

General information, not legal advice.

Ask about a specific Walnut Creek property

Ask GoCodebook how Walnut Creek's fences and walls rules apply to your situation and get an answer that cites the section.

Ask your question

More on building on your lot in Walnut Creek