Scotts Valley · Zoning · R-1-10
Scotts Valley R-1-10 zoning: height, setbacks and lot size
In Scotts Valley's R-1-10 zone, generally buildings can be up to 35 feet tall, the front setback is 20 feet and the minimum lot size is 10,000 sq. ft., with the conditions listed below (Scotts Valley code, read October 2026).
Key points
- Maximum building height: 35 feet (single-family dwelling)
- Minimum front setback: 20 feet
- Minimum rear setback: 15 feet
- Minimum lot size: 10,000 sq. ft.
- Maximum lot coverage: 50%
- Maximum density: 1 unit per 10,000 sq ft
R-1-10 (R-1 Single-Family Residential) is a zoning district in Scotts Valley. Every value below was read from the Scotts Valley Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in R-1-10
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 35 feet Applies: single-family dwelling § 17.14.040 · code textNo single-family dwelling in the R-1 zoning district shall exceed thirty-five feet in height unless otherwise provided in Section 17.46.050 of this title. |
|---|---|
| Minimum front setback | 20 feet § 17.14.040 · code textTable row “R-1-10”, column “Front Yard”: 20 feet |
| Minimum rear setback | 15 feet § 17.14.040 · code textTable row “R-1-10”, column “Rear Yard”: 15 feet |
| Minimum lot size | 10,000 sq. ft. § 17.14.040 · code textTable row “R-1-10”, column “Minimum Lot Area”: 10,000 sq. ft. |
| Maximum lot coverage | 50% § 17.14.040 · code textThe maximum site coverage in the R-1 zoning district shall be fifty percent. |
| Maximum density | 1 unit per 10,000 sq ft § 17.14.040 · code textTable row “R-1-10”, column “Maximum Lot Density”: 10,000 sq. ft./dwelling unit |
Not on this page
We did not find a general stories, side setback, FAR limit for R-1-10 in the zoning tables we read. The code may still set one elsewhere — check the Scotts Valley Municipal Code.
Other Scotts Valley zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Scotts Valley's R-1-10 zone?
35 feet (single-family dwelling) — Scotts Valley Municipal Code § 17.14.040.
What is the minimum front setback in Scotts Valley's R-1-10 zone?
20 feet — Scotts Valley Municipal Code § 17.14.040.
What is the minimum rear setback in Scotts Valley's R-1-10 zone?
15 feet — Scotts Valley Municipal Code § 17.14.040.
What is the minimum lot size in Scotts Valley's R-1-10 zone?
10,000 sq. ft. — Scotts Valley Municipal Code § 17.14.040.
What is the maximum lot coverage in Scotts Valley's R-1-10 zone?
50% — Scotts Valley Municipal Code § 17.14.040.
General information, not legal advice.
Ask about a Scotts Valley property in R-1-10
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question