San Clemente · Zoning · RL
San Clemente RL zoning: height, setbacks and lot size
In San Clemente's RL zone, buildings can be up to 25 ft tall, the front setback is 20 ft and the minimum lot size is 6,000 sq ft (San Clemente code, read October 2026).
Key points
- Maximum building height: 25 ft
- Minimum front setback: 20 ft
- Minimum side setback: 10% of average lot width, or 6 ft, whichever is smaller
- Minimum rear setback: 10 ft
- Minimum lot size: 6,000 sq ft
- Maximum lot coverage: 50%
- Maximum density: 4.5 units per gross acre (counted on gross acres; also 1 dwelling unit per lot)
RL is a zoning district in San Clemente. Every value below was read from the San Clemente Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in RL
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 25 ft § 17.32.040 · code textTable row “Building Height, Maximum”, column “RL”: 25 ft. |
|---|---|
| Minimum front setback | 20 ft § 17.32.040 · code textTable row “To Primary Structure:”, column “RL”: 20 ft. |
| Minimum side setback | 10% of average lot width, or 6 ft, whichever is smaller § 17.32.040 · code textTable row “Interior-Side Yard Setback, Minimum 6”, column “RL”: 10% of avg. lot width; or 6 ft., whichever is smaller |
| Minimum rear setback | 10 ft § 17.32.040 · code textTable row “Rear Yard Setback, Minimum 8”, column “RL”: 10 ft. |
| Minimum lot size | 6,000 sq ft § 17.32.040 · code textTable row “Lot Area, Minimum”, column “RL”: 6,000 s.f. |
| Maximum lot coverage | 50% § 17.32.040 · code textTable row “Lot Coverage, Maximum”, column “RL”: 50% |
| Maximum density | 4.5 units per gross acre Applies: counted on gross acres; also 1 dwelling unit per lot § 17.32.040 · code textTable row “Density, Maximum”, column “RL”: 4.5 units per gross acre 7.0 dwelling units per net acre |
Uses in RL
Uses the code's use tables allow in RL, or allow with a permit. Each links to its page with the code section.
- Single-family home — Allowed
- Church or place of worship — Needs a conditional use permit
When a different number applies
The code sets other values for particular lots, buildings or locations in RL:
- Maximum density: 7.0 dwelling units per net acre — counted on net acres § 17.32.040
Not on this page
We did not find a general stories, FAR limit for RL in the zoning tables we read. The code may still set one elsewhere — check the San Clemente Municipal Code.
Other San Clemente zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in San Clemente's RL zone?
25 ft — San Clemente Municipal Code § 17.32.040.
What is the minimum front setback in San Clemente's RL zone?
20 ft — San Clemente Municipal Code § 17.32.040.
What is the minimum side setback in San Clemente's RL zone?
10% of average lot width, or 6 ft, whichever is smaller — San Clemente Municipal Code § 17.32.040.
What is the minimum rear setback in San Clemente's RL zone?
10 ft — San Clemente Municipal Code § 17.32.040.
What is the minimum lot size in San Clemente's RL zone?
6,000 sq ft — San Clemente Municipal Code § 17.32.040.
General information, not legal advice.
Ask about a San Clemente property in RL
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question