Redding · Zoning · GI
Redding GI zoning: height, setbacks and lot size
In Redding's GI zone, generally buildings can be up to 50 ft tall, the front setback is 25 ft and the minimum lot size is 20,000 sq ft, with the conditions listed below (Redding code, read October 2026).
Key points
- Maximum building height: 50 ft
- Minimum front setback: 25 ft (Arterial streets and frontage roads.)
- Minimum side setback: None required (Unless a buffer yard is required.)
- Minimum rear setback: None required (Unless a buffer yard is required.)
- Minimum lot size: 20,000 sq ft
GI (General Industry) is a zoning district in Redding. Every value below was read from the Redding Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in GI
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 50 ft § 18.34.040 · code textTable row “Maximum building height (feet)”, column “"GI"”: 50 |
|---|---|
| Minimum front setback | 25 ft Applies: Arterial streets and frontage roads. § 18.34.040 · code textTable row “Front”, column “"GI"”: 25 |
| Minimum side setback | None required Applies: Unless a buffer yard is required. § 18.34.040 · code textTable row “Side and rear”, column “"GI"”: No side yard |
| Minimum rear setback | None required Applies: Unless a buffer yard is required. § 18.34.040 · code textTable row “Side and rear”, column “"GI"”: No side yard |
| Minimum lot size | 20,000 sq ft § 18.34.040 · code textTable row “Minimum lot area (square feet)”, column “"GI"”: 20,000 |
When a different number applies
The code sets other values for particular lots, buildings or locations in GI:
- Minimum front setback: 20 ft — Streets other than arterial streets and frontage roads. § 18.34.040
- Minimum front setback: 15 ft — Nonarterial and frontage road front yards, on parcels under forty-five thousand square feet. § 18.34.040
- Minimum side setback: 25 ft — Corner side yard on arterial streets and frontage roads; twenty feet on other streets. § 18.34.040
Not on this page
We did not find a general stories, lot coverage, FAR, density limit for GI in the zoning tables we read. The code may still set one elsewhere — check the Redding Municipal Code.
Other Redding zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Redding's GI zone?
50 ft — Redding Municipal Code § 18.34.040.
What is the minimum front setback in Redding's GI zone?
25 ft (arterial streets and frontage roads) — Redding Municipal Code § 18.34.040.
What is the minimum side setback in Redding's GI zone?
None required (unless a buffer yard is required) — Redding Municipal Code § 18.34.040.
What is the minimum rear setback in Redding's GI zone?
None required (unless a buffer yard is required) — Redding Municipal Code § 18.34.040.
What is the minimum lot size in Redding's GI zone?
20,000 sq ft — Redding Municipal Code § 18.34.040.
General information, not legal advice.
Ask about a Redding property in GI
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question