Rancho Cucamonga · Zoning · LM
Rancho Cucamonga LM zoning: height, setbacks and lot size
In Rancho Cucamonga's LM zone, generally buildings can be up to 35 ft tall, the front setback is 32 ft and the minimum lot size is 5,000 sf, with the conditions listed below (Rancho Cucamonga code, read October 2026).
Key points
- Maximum building height: 35 ft
- Minimum front setback: 32 ft (average setback measured from the curb face; it may vary by 5 ft either way)
- Minimum rear setback: 15 ft
- Minimum lot size: 5,000 sf
- Maximum lot coverage: 50%
- Maximum density: 8 du/ac
LM (Low Medium) is a zoning district in Rancho Cucamonga. Every value below was read from the Rancho Cucamonga Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in LM
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 35 ft § 17.36.010 · code textTable row “Primary buildings”, column “LM”: 35 ft |
|---|---|
| Minimum front setback | 32 ft Applies: average setback measured from the curb face; it may vary by 5 ft either way See notes 4, 5 below the table in the code. § 17.36.010 · code textTable row “Front yard (4)”, column “LM”: 32 ft (5) Note 4: Setbacks are measured between the structure and curb face in front yards and corner side yards. Setbacks are measured between the structure and property line in rear yards and interior side yards. Note 5: Average setback, which shall vary +/- five feet. |
| Minimum rear setback | 15 ft See note 4 below the table in the code. § 17.36.010 · code textTable row “Rear yard (4)”, column “LM”: 15 ft Note 4: Setbacks are measured between the structure and curb face in front yards and corner side yards. Setbacks are measured between the structure and property line in rear yards and interior side yards. |
| Minimum lot size | 5,000 sf § 17.36.010 · code textTable row “Lot area (minimum)”, column “LM”: 5,000 sf |
| Maximum lot coverage | 50% § 17.36.010 · code textTable row “Lot coverage”, column “LM”: 50% |
| Maximum density | 8 du/ac See note 3 below the table in the code. § 17.36.010 · code textTable row “Maximum density”, column “LM”: 8 du/ac (3) Note 3: Developing multi-family in the LM zone and single-family in the M zone at the maximum density requires compliance with Standards for Higher Residential Densities as outlined in section 17.36.020(D) . |
Uses in LM
Uses the code's use tables allow in LM, or allow with a permit. Each links to its page with the code section.
- Duplex — Allowed
- Apartment building — Allowed
- Bed and breakfast — Needs a minor use permit
- Private school — Needs a minor use permit — see note
Not on this page
We did not find a general stories, side setback, FAR limit for LM in the zoning tables we read. The code may still set one elsewhere — check the Rancho Cucamonga Municipal Code.
Other Rancho Cucamonga zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Rancho Cucamonga's LM zone?
35 ft — Rancho Cucamonga Municipal Code § 17.36.010.
What is the minimum front setback in Rancho Cucamonga's LM zone?
32 ft (average setback measured from the curb face; it may vary by 5 ft either way) — Rancho Cucamonga Municipal Code § 17.36.010.
What is the minimum rear setback in Rancho Cucamonga's LM zone?
15 ft — Rancho Cucamonga Municipal Code § 17.36.010.
What is the minimum lot size in Rancho Cucamonga's LM zone?
5,000 sf — Rancho Cucamonga Municipal Code § 17.36.010.
What is the maximum lot coverage in Rancho Cucamonga's LM zone?
50% — Rancho Cucamonga Municipal Code § 17.36.010.
General information, not legal advice.
Ask about a Rancho Cucamonga property in LM
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question