Pleasant Hill · Zoning · LI
Pleasant Hill LI zoning: height, setbacks and lot size
In Pleasant Hill's LI zone, buildings can be up to 35 ft tall, the front setback is 20 ft and the minimum lot size is 20,000 sq ft (Pleasant Hill code, read October 2026).
Key points
- Maximum building height: 35 ft
- Minimum front setback: 20 ft
- Minimum lot size: 20,000 sq ft
- Maximum floor area ratio (FAR): 0.4
LI is a zoning district in Pleasant Hill. Every value below was read from the Pleasant Hill Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in LI
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 35 ft § 18.25.030 · code textTable row “Building Height (ft)”, column “LI”: 35 |
|---|---|
| Minimum front setback | 20 ft § 18.25.030 · code textTable row “Front (ft)”, column “LI”: 20 |
| Minimum lot size | 20,000 sq ft § 18.25.030 · code textTable row “Lot Area (sq. ft.)”, column “LI”: 20,000 |
| Maximum floor area ratio (FAR) | 0.4 § 18.25.030 · code textTable row “Gross Floor Area Ratio (commercial)”, column “LI”: 0.4 |
Uses in LI
Uses the code's use tables allow in LI, or allow with a permit. Each links to its page with the code section.
- Emergency shelter — Allowed — see note
When a different number applies
The code sets other values for particular lots, buildings or locations in LI:
- Minimum side setback: 25 ft — Nonresidential use, along a property line adjoining a residential zoning district or residential use. § 18.25.040
- Minimum rear setback: 25 ft — Nonresidential use, along a property line adjoining a residential zoning district or residential use. § 18.25.040
Not on this page
We did not find a general stories, side setback, rear setback, lot coverage, density limit for LI in the zoning tables we read. The code may still set one elsewhere — check the Pleasant Hill Municipal Code.
Other Pleasant Hill zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Pleasant Hill's LI zone?
35 ft — Pleasant Hill Municipal Code § 18.25.030.
What is the minimum front setback in Pleasant Hill's LI zone?
20 ft — Pleasant Hill Municipal Code § 18.25.030.
What is the minimum lot size in Pleasant Hill's LI zone?
20,000 sq ft — Pleasant Hill Municipal Code § 18.25.030.
What is the maximum floor area ratio (far) in Pleasant Hill's LI zone?
0.4 — Pleasant Hill Municipal Code § 18.25.030.
General information, not legal advice.
Ask about a Pleasant Hill property in LI
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question