Madera County · Zoning · RRS 10
Madera County RRS 10 zoning: height, setbacks and lot size
In Madera County's RRS 10 zone, buildings can be up to 35 ft tall, the front setback is 25 ft and the minimum lot size is 9 acres (Madera County code, read October 2026).
Key points
- Maximum building height: 35 ft
- Minimum front setback: 25 ft
- Minimum side setback: 10 ft
- Minimum rear setback: 20 ft
- Minimum lot size: 9 acres
- Maximum lot coverage: 20%
- Maximum floor area ratio (FAR): 5% (the same for 1, 2 and 3 story buildings)
- Maximum density: 2 DU per lot
RRS 10 is a zoning district in Madera County. Every value below was read from the Madera County Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in RRS 10
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 35 ft § 18.11.120 · code textTable row “Max. structure height”, column “10”: 35 |
|---|---|
| Minimum front setback | 25 ft § 18.11.120 · code textTable row “Front setback (ft.) from right-of-way”, column “10”: 25 |
| Minimum side setback | 10 ft § 18.11.120 · code textTable row “Side setback (ft.) — over 1 ac. under 1 ac.”, column “10”: 10 |
| Minimum rear setback | 20 ft § 18.11.120 · code textTable row “Rear setback (ft.)”, column “10”: 20 |
| Minimum lot size | 9 acres § 18.11.120 · code textTable row “Min. lot area”, column “10”: 9 |
| Maximum lot coverage | 20% § 18.11.120 · code textTable row “Max. lot coverage (%)”, column “10”: 20 |
| Maximum floor area ratio (FAR) | 5% Applies: the same for 1, 2 and 3 story buildings § 18.11.120 · code textTable row “1 story building”, column “10”: 5 |
| Maximum density | 2 DU per lot § 18.11.120 · code textTable row “Maximum permitted density (DU per lot)”, column “10”: 2 |
Not on this page
We did not find a general stories limit for RRS 10 in the zoning tables we read. The code may still set one elsewhere — check the Madera County Municipal Code.
Other Madera County zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Madera County's RRS 10 zone?
35 ft — Madera County Municipal Code § 18.11.120.
What is the minimum front setback in Madera County's RRS 10 zone?
25 ft — Madera County Municipal Code § 18.11.120.
What is the minimum side setback in Madera County's RRS 10 zone?
10 ft — Madera County Municipal Code § 18.11.120.
What is the minimum rear setback in Madera County's RRS 10 zone?
20 ft — Madera County Municipal Code § 18.11.120.
What is the minimum lot size in Madera County's RRS 10 zone?
9 acres — Madera County Municipal Code § 18.11.120.
General information, not legal advice.
Ask about a Madera County property in RRS 10
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question