Lindsay · Zoning · IL
Lindsay IL zoning: height, setbacks and lot size
In Lindsay's IL zone, the front setback is 10 ft and the minimum lot size is No minimum (Lindsay code, read October 2026).
Key points
- Minimum front setback: 10 ft
- Minimum side setback: None required (15 ft where abutting a UR, RCO, RA, R, RM, PO or C district.)
- Minimum rear setback: None required
- Minimum lot size: No minimum
IL is a zoning district in Lindsay. Every value below was read from the Lindsay Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in IL
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Minimum front setback | 10 ft § 18.11.050 · code textThe minimum front yard for both the IL and IH districts shall be ten feet. |
|---|---|
| Minimum side setback | None required Applies: 15 ft where abutting a UR, RCO, RA, R, RM, PO or C district. § 18.11.050 · code textExcept as provided below, no rear yard or side yards shall be required: |
| Minimum rear setback | None required § 18.11.050 · code textExcept as provided below, no rear yard or side yards shall be required: |
| Minimum lot size | No minimum § 18.11.050 · code textNo minimum site area shall be required in the IL district. |
When a different number applies
The code sets other values for particular lots, buildings or locations in IL:
- Minimum rear setback: 15 ft — abutting a UR, RCO, RA, R, RM, PO, or C district § 18.11.050
Not on this page
We did not find a general height, stories, lot coverage, FAR, density limit for IL in the zoning tables we read. The code may still set one elsewhere — check the Lindsay Municipal Code.
Other Lindsay zoning districts
Who this affects
Frequently asked questions
What is the minimum front setback in Lindsay's IL zone?
10 ft — Lindsay Municipal Code § 18.11.050.
What is the minimum side setback in Lindsay's IL zone?
None required (15 ft where abutting a UR, RCO, RA, R, RM, PO or C district) — Lindsay Municipal Code § 18.11.050.
What is the minimum rear setback in Lindsay's IL zone?
None required — Lindsay Municipal Code § 18.11.050.
What is the minimum lot size in Lindsay's IL zone?
No minimum — Lindsay Municipal Code § 18.11.050.
General information, not legal advice.
Ask about a Lindsay property in IL
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question