Skip to content

Lincoln · Zoning · B-P

Lincoln B-P zoning: height, setbacks and lot size

In Lincoln's B-P zone, generally buildings can be up to 35 ft tall, the front setback is 20 ft and the minimum lot size is 6,250 sq ft, with the conditions listed below (Lincoln code, read October 2026).

Key points

  • Maximum building height: 35 ft (Principal buildings. Accessory buildings are limited to 16 ft.)
  • Minimum front setback: 20 ft
  • Minimum side setback: 5 ft
  • Minimum rear setback: 5 ft (10 ft when adjacent to a residential district)
  • Minimum lot size: 6,250 sq ft
  • Maximum lot coverage: 60%

B-P (Business and Professional District) is a zoning district in Lincoln. Every value below was read from the Lincoln Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in B-P

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
35 ft
Applies: Principal buildings. Accessory buildings are limited to 16 ft.
§ 18.20.030 · code text
The maximum height for principal buildings and structures in the B-P district shall be 35 feet; provided, that an additional foot in height may be added, to a maximum height of 50 feet for each additional foot of side yard added to the minimum side yard requirement.
Minimum front setback
20 ft
§ 18.20.080 · code text
There shall be a front yard of not less than 20 feet in depth;
Minimum side setback
5 ft
§ 18.20.080 · code text
There shall be a side yard on each side of all buildings of not less than five feet;
Minimum rear setback
5 ft
Applies: 10 ft when adjacent to a residential district
§ 18.20.080 · code text
There shall be a rear yard for each lot of not less than five feet except ten feet when adjacent to a residential district;
Minimum lot size
6,250 sq ft
§ 18.20.040 · code text
(2) Interior lot: 6,250 square feet.
Maximum lot coverage
60%
§ 18.20.060 · code text
The maximum lot coverage by all structures and buildings in the B-P district shall not exceed 60 percent of the lot area.

Uses in B-P

Uses the code's use tables allow in B-P, or allow with a permit. Each links to its page with the code section.

When a different number applies

The code sets other values for particular lots, buildings or locations in B-P:

  • Maximum building height: 50 ft — Maximum, reached by adding one foot of height for each extra foot of side yard beyond the minimum. § 18.20.030
  • Minimum rear setback: 10 ft — When adjacent to a residential district § 18.20.080

Not on this page

We did not find a general stories, FAR, density limit for B-P in the zoning tables we read. The code may still set one elsewhere — check the Lincoln Municipal Code.

Other Lincoln zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Lincoln's B-P zone?

35 ft (principal buildings. Accessory buildings are limited to 16 ft) — Lincoln Municipal Code § 18.20.030.

What is the minimum front setback in Lincoln's B-P zone?

20 ft — Lincoln Municipal Code § 18.20.080.

What is the minimum side setback in Lincoln's B-P zone?

5 ft — Lincoln Municipal Code § 18.20.080.

What is the minimum rear setback in Lincoln's B-P zone?

5 ft (10 ft when adjacent to a residential district) — Lincoln Municipal Code § 18.20.080.

What is the minimum lot size in Lincoln's B-P zone?

6,250 sq ft — Lincoln Municipal Code § 18.20.040.

General information, not legal advice.

Ask about a Lincoln property in B-P

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Lincoln