Lemoore · Zoning · PO
Lemoore PO zoning: height, setbacks and lot size
In Lemoore's PO zone, buildings can be up to 35 ft tall, the front setback is 25 ft and the minimum lot size is 20,000 sq ft (Lemoore code, read October 2026).
Key points
- Maximum building height: 35 ft
- Minimum front setback: 25 ft
- Minimum side setback: 0 ft (Required setback is 10 ft when the lot is next to any residential zoning district.)
- Minimum rear setback: 0 ft (Required setback is 10 ft when the lot is next to any residential zoning district.)
- Minimum lot size: 20,000 sq ft
- Maximum lot coverage: 65%
- Maximum floor area ratio (FAR): 0.60
PO is a zoning district in Lemoore. Every value below was read from the Lemoore Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in PO
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 35 ft § 9-5A-4 · code textTable row “Height, maximum”, column “PO”: 35' |
|---|---|
| Minimum front setback | 25 ft § 9-5A-4 · code textTable row “Generally 2,12”, column “PO”: 25' |
| Minimum side setback | 0 ft Applies: Required setback is 10 ft when the lot is next to any residential zoning district. § 9-5A-4 · code textTable row “Interior side”, column “PO”: 0' 5 |
| Minimum rear setback | 0 ft Applies: Required setback is 10 ft when the lot is next to any residential zoning district. § 9-5A-4 · code textTable row “Rear yard”, column “PO”: 0' 5 |
| Minimum lot size | 20,000 sq ft § 9-5A-4 · code textTable row “Lot size, minimum (square feet)”, column “PO”: 20,000 |
| Maximum lot coverage | 65% § 9-5A-4 · code textTable row “Lot coverage, maximum percent of lot area 8”, column “PO”: 65% |
| Maximum floor area ratio (FAR) | 0.60 § 9-5A-4 · code textTable row “Maximum”, column “PO”: 0.60 |
Not on this page
We did not find a general stories, density limit for PO in the zoning tables we read. The code may still set one elsewhere — check the Lemoore Municipal Code.
Other Lemoore zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Lemoore's PO zone?
35 ft — Lemoore Municipal Code § 9-5A-4.
What is the minimum front setback in Lemoore's PO zone?
25 ft — Lemoore Municipal Code § 9-5A-4.
What is the minimum side setback in Lemoore's PO zone?
0 ft (required setback is 10 ft when the lot is next to any residential zoning district) — Lemoore Municipal Code § 9-5A-4.
What is the minimum rear setback in Lemoore's PO zone?
0 ft (required setback is 10 ft when the lot is next to any residential zoning district) — Lemoore Municipal Code § 9-5A-4.
What is the minimum lot size in Lemoore's PO zone?
20,000 sq ft — Lemoore Municipal Code § 9-5A-4.
General information, not legal advice.
Ask about a Lemoore property in PO
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question