Skip to content

Lake Forest · Zoning · RP

Lake Forest RP zoning: height, setbacks and lot size

In Lake Forest's RP zone, generally buildings can be up to 35 ft tall, the front setback is 20 ft and the minimum lot size is 7,200 sq ft, with the conditions listed below (Lake Forest code, read October 2026).

Key points

  • Maximum building height: 35 ft
  • Minimum front setback: 20 ft
  • Minimum side setback: 5 ft
  • Minimum rear setback: 25 ft
  • Minimum lot size: 7,200 sq ft (Except as otherwise allowed by Section 9.144.020)
  • Maximum density: 1 unit per 3,000 sq ft

RP (RP Residential-Professional District) is a zoning district in Lake Forest. Every value below was read from the Lake Forest Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in RP

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
35 ft
§ 9.68.080 · code text
Thirty-five feet maximum except as otherwise allowed by Section 9.144.020.
Minimum front setback
20 ft
§ 9.144.030 · code text
Table row “RP”, column “Front”: 20
Minimum side setback
5 ft
§ 9.144.030 · code text
Table row “RP”, column “Side”: 5
Minimum rear setback
25 ft
§ 9.144.030 · code text
Table row “RP”, column “Rear”: 25
Minimum lot size
7,200 sq ft
Applies: Except as otherwise allowed by Section 9.144.020
§ 9.68.080 · code text
Seven thousand two hundred square feet minimum except as otherwise allowed by Section 9.144.020.
Maximum density
1 unit per 3,000 sq ft
§ 9.68.080 · code text
Three thousand square feet minimum net land area per dwelling unit.

Uses in RP

Uses the code's use tables allow in RP, or allow with a permit. Each links to its page with the code section.

When a different number applies

The code sets other values for particular lots, buildings or locations in RP:

  • Minimum front setback: 10 ft — On panhandle building site, from any property line § 9.144.030

Not on this page

We did not find a general stories, lot coverage, FAR limit for RP in the zoning tables we read. The code may still set one elsewhere — check the Lake Forest Municipal Code.

Other Lake Forest zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Lake Forest's RP zone?

35 ft — Lake Forest Municipal Code § 9.68.080.

What is the minimum front setback in Lake Forest's RP zone?

20 ft — Lake Forest Municipal Code § 9.144.030.

What is the minimum side setback in Lake Forest's RP zone?

5 ft — Lake Forest Municipal Code § 9.144.030.

What is the minimum rear setback in Lake Forest's RP zone?

25 ft — Lake Forest Municipal Code § 9.144.030.

What is the minimum lot size in Lake Forest's RP zone?

7,200 sq ft (except as otherwise allowed by Section 9.144.020) — Lake Forest Municipal Code § 9.68.080.

General information, not legal advice.

Ask about a Lake Forest property in RP

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Lake Forest